Jump to content

philpot

Donator
 View Profile  See their activity

  • Content Count

    6,587

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by philpot

  1. philpot
    Well thanks to Kalibrun giving me the tip off regarding a stock on BBS forum, I bought the stock which arrived today and now sits on my project 200 and to say I am pleased with it is an understatement. I got rid of the AA mod which was useless and long so after getting the mod / adapter off I got a new 15mm adapter and to my surprise after testing a 3D printed mod, it was cheap, very quiet and lightweight so that is also now fitted along with a new air cylinder. Now to turn to the metalwork with some input from Si and Jimmy. It is starting to progress.........? Oh yes and an Airmax AO s
  2. philpot
    Well a few message chats and the stock is one it's way to me during this week, I hope. I would like to have my current stock repaired, strengthened and refinished as I would like the choice of both. Phil
  3. philpot
    Why bother Mitch. Phil
  4. philpot
    I must admit Jason, I have my own apprentice and have told him about your gun, he likes the look of the NP02 ( very much like the FX Verminator) but I understand they can be a bit shite, some are good and some are bad. I am however going strap a scope on and try it in the range for my young friend to try and at £360 it is worth a try. Phil
  5. philpot
    Just bought the two piece stock for my S200 Jimmy so you will be examining that in a few weeks to see if it can be made better........................ or at least I hope you will. Phil
  6. philpot
    Very rarely see them around here but Magpies are a menace deserving every pellet, bullet or cartridge load possible, nice looking but eveil little gits. Phil
  7. philpot
    Cheeky barsteward...........................................? You will get there Jason and with our Jimmy's help it is sure to be easier. I have to say I really like the look of this Kral, Oh by the way Jason...........................you have split your pants ?? Phil
  8. philpot
    It would be worth testing with the power dropping a little as a comparison. Phil
  9. philpot
    I used RS with great success in sub12 and tried them once in my old Rapid .22 fac but in all honesty the AA Field Heavy was just sooooo good, I didn't bother any further however when my Wildcat arrives in a couple of weeks, I intend trying RS again with the power turned down as low as it goes but run AAFH at full power. Well thats idea in my head, might be viable or not, we will see. Phil
  10. philpot
    You are right, it really is a nice stock although I believe it will need slight alteration to fit the Mk1 around the bolt but not too major. One to watch but rather pricey. Thank you for the heads up. Phil
  11. philpot
    Got it in one DB. I spoke to him at the Northern Shooting Show and asked it my Nitesite would work on the MTC Viper Connect, oh no came back the response. Saw him again at the Game Fair several months later and asked him the same question again, yes no problem at all was the response this time round, fcuking idiot with no idea whatsoever. BELLEND is a great descriptive name for him ??? Phil
  12. philpot
    As some of you are aware I have bought a Mk1 S200 split stock rifle with a nasty double crack in the hollowed out stock. Now this gun is a project I know and some things can be sorted, some have but the stock may be a stretch too far sooooooo and here is the 'long shot', does anyone have a spare Mk1 stock or even better a T200 / S200T as they are sometimes called that they may consider selling or perhaps ask in the rfd if they might have one. It is a long shot I know but worth asking all the same. You can see from this photo that she is a little fragile around the grip area and a new st
  13. philpot
    So does Ratworks who seem to get plenty Jon..............? Phil
  14. philpot
    There are people who have had no issues at all and some years ago I really fancied the Air Wolf but at that time my rfd had one in for repair and the hassle of getting Daystate to sort out the problem was crazy, if my memory serves me well, it went back three times and still didn't get it sorted so the guy sold it and at the same time another chap I knew had bought one and again having power issues, it went back and came back sorted...................not, A target showing the grouping ( I think) thirty mts was included, despite 4 of us trying, we could not get a group anywhere near as good as
  15. philpot
    You can buy a Dr Bob air tank ring and connect the bipod to that, I bought one for my Impact, works fine but I am sure Gaystate..........sorry, Daystate will blame that for ANY fault following the use of it. Dr Bobs 60mm Buddy Bottle Bipod Clamp from BEST-Fittings WWW.EBAY.CO.UK Near the muzzle of the gun! Regards, the BEST Fittings Team. All edges radius away from the bottle to avoid crimping the bottle finish. We know that you are our... Phil
  16. philpot
    Perhaps there is a reason why a number of rfd's dont deal with them. One thing to remember is that if you find a fault even on a new rifle..................IT'S YOUR FAULT Phil
  17. philpot
    Completely agree chaps. now to Reece's query regarding a Co2 gun for hunting............ well my opinion for what it is worth, good fun in the garden plinking but not a hunting riflle. Co2 is not a stable source of propulsion compared to a pcp ot springer rifle. They vary in power according to temperature so very few people use them.
  18. philpot
    Totally agree BN
  19. philpot
    Must confess that the TX200 I bought because Mark raved on about them was an amazing bit of kit once I had it tuned and actually pellet on pellet but just too heavy to walk round with. If I had the range of perms that I have now, it would have come into it's own. There is a tx200hc and a Prosport in my rfd as we speak which look rather nice but as I have committed to buying the new Mk3 Wildcat, and I have just bought the project s200, not much money left over. I know Mark loves his springers and totally agree as to the level of satisfaction of making the kill with a springer, I will have
  20. philpot
    Nice one must admit I do like shooting ferals as well. Phil
  21. philpot
    Thankyou for that but my rfd sells loads of Weihrauch guns as well as Hull Cartridges which he pops over the bridge to collect so very easy to get one but I am grateful for the offer. Phil
  22. philpot
    Somewhat strange that the farmer presenter on Country File (a BBC programme) was warned to retract his comments about Chris Packtwat regarding the negative effects of the shooting ban on pigeon or he would be sacked from the show. Packtwat has the highest level queens award and is so well placed he is teflon coated. I will sign anyway. Phil
  23. philpot
    Don't start bloody 'THINKING' Jimmy, you know that is going to cost you...................................?
  24. philpot
    You made that gun a cracker jimmy and I do want at some stage to have a few shots through it as I have never come across one of these earlier models. I want first refusal if the day ever comes that you want to sell it, I know you won't but just keep that in the back of your mind matey. Phil
  25. philpot
    Support local Jason or Jimmy will be on your case.
×
×
  • Create New...