Jump to content

philpot

Donator
 View Profile  See their activity

  • Content Count

    6,587

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by philpot

  1. philpot
    Never had any issues with mine Mitch but may be worth giving Forest Lodge guns a call and ask for Matt, the owner as he has forgotton more about rifles than most people ever know so could know of the problem and what is available to sort it. 01673 858554 Phil
  2. philpot
    I only wish the MECs were mine, soon get them sorted ready to roll again. I do like the Mec loaders, if you don't want then just put a big post mark and ship to England ? Phil
  3. philpot
    I thought that HW rifles all performed better with 5.52mm but stand to be corrected by those who actually know, it was just something that stuck in my mind. Phil
  4. philpot
    Chris a knackered his back Jimmy and laid up for a month, he is moving around very slowly with a walking stick but hardly able to pick up the kettle let alone his gun. He has acually bought a new ratting gun but has not been able to fire a shot yet. Phil
  5. philpot
    Totally agree Jeff, you cannot have too much of a good thing. Now we have the Cricket for Friday nights, Impact short for Saturday nights and the Impact std for Sunday nights so there is only 4 nights left Jeff and we have not even started on the Rapids yet. ? ? ? Phil
  6. philpot
    Just remember to be careful my friend and enjoy the session. We have rain forcast all day / night so film night tomorrow and fart around with a mates gun in the day. Phil
  7. philpot
    I will bring the strimmer and mower next time I am over Si. What did you do with the old beemer or is it still full of stuff at your mothers. ? Phil
  8. philpot
    Several tuning houses seem to have closed down and Phil Crampton's Ratworks in Leicester has a good name so it's a case of pays yer dosh and get the service. There is of course Blackpool Airguns who I believe have a service dept or perhaps worth phoning a few rfd's to see if they can do it for you. Is there a fault with the gun or are you thinking perhaps it's time to have a service. Phil
  9. philpot
    These look seriously impressive Mitch.
  10. philpot
    If this belonged to Bucket Boy Jeff, I would think it will be spot on. Phil
  11. philpot
    Ditto
  12. philpot
    Just seen an article on Pro Hunter Premium slugs for the sub 12 air guns which gives food for thought weighing in at just under 18gr but not sure if they are any good in the real world although may well suit my Wildcat fac at 30fpe, see what you think. Pro Hunter Premium High Impact .22 review WWW.AIRGUNMAGAZINE.CO.UK Hunters with sub-12 foot pound rifles no longer need to feel left out when it comes to slugs thanks to Pro Hunter’s new .22, as Mike Morton finds out. The last 18... Phil
  13. philpot
    I have to say Ben that I am a huge fan of fac air, starting off with a Rapid mk2 .22 at 28fpe, a sound bit of kit, dislikes, weight and no air gauge meaning counting the number of mags to know what is left in the tank but a cracking hunter. Then moved to FX fac about 4 years ago with an Impact .25 dislikes......... I will let you know when I find one, feckin awsome gun I had two sub 12 Wildcats and loved them apart from the mags but then came the Mk3 with Superior barrel liner and the 18 shot (.22) sideshot magazine soooooo after selling some fishing gear, I bought a .22 fac 12f
  14. philpot
    Cheers Mitch, I am of the same mind mate, HW it is. Phil
  15. philpot
    Don't want another 3D printed mod as I have had to repair one very recently. A&M mods have a good name in sub 12 but no idea which would be needed for fac.
  16. philpot
    A 2'' mod on the Wildcat is going to be overlapping the gauge I think although 110mm long sounds good ( the XL is 200mm long ) but does he have a website so I can see what is available as it could be a better bet for the Impact because there is room for improvement there although in open ground it makes little difference but the Wildcat is going to be used in other areas so getting the best result I can is high on my agenda. I have found only one reference to Paul Finch and that was someone selling one of his mods which was a 3D printed job, are all his made this way Mitch. Phil
  17. philpot
    Just been to the dairy farm to try the mods inbetween the big sheds to see if there is much difference and to be honest the Weihrauch has the edge with better dampening. Do I think it is worth a ton extra to get that bit quieter ............................................................ hmmm, not sure that it is but I confess I do like this mod however now awaiting to hear more from Mitch regarding a mod made by Paul Finch. Interesting test and I popped off two ferals in the test so even better. Phil
  18. philpot
    Where is he Mitch. You said the Weihrauch was the route to go so what is the score on this one.
  19. philpot
    Moving on from my earlier thread regarding mod selection for the FX Verminator I was going to buy, well as most of you know that didn't happen and my order was switched to an FX Wildcat Mk3 in .22 fac. The gun arrived to my complete delight although typical Sportsman company, three weeks late and still awaiting delivery of the spare magazine ?, the gun is cracking although I have not had too much time to spend in the field with it so far but one thing I had hoped for was to run two pellet types, AA Field Heavy for normal hunting and JSB RS for closer ratting and to that end, the AA pellets at
  20. philpot
    They do look lovely but what a pity they don't have a textured or chequered pistol grip, mine was a bag of shite and went back Hull Cartridge never to return or at least not to me but I found a destinct lack of grip, just me I'm sure but I would have the black soft touch any day of the week for the grip it gave. Phil
  21. philpot
    I think when it comes to tuning and the investment made, if it brings greater pleasure to the owner, then that is what it is all about. A friend of mine and used to be on here used to tweek his hw100 rifles which gave him pleasure and as Mitch said they don't need much doing if at all, you have what you want C3PO. A very nice stock by the way. I wanted to have an Ultra to have a full tune some years ago and just as I was about to sort the date with Airtech, I was made redundant so it never got the treatment which was the same as Mitch had done to his................................. I
  22. philpot
    Must have been using Daystate guns ?? Phil
  23. philpot
    AND let us not forget Weihrauch who are having issues with the 110 series and even heard of some 110 series having trouble............................what the hell is going on although fair to say Air Arms and Weihrauch will sort things but Daystate are a lost cause, I suppose if they employ a twat to run the company, what else can you expect. ? Phil
  24. philpot
    Nothing Rez, I heard the Chinese or Japaneese had taken gold in the target shooting but don't know which one or which discipline. here endeth today's usless bit of information ? Phil
  25. philpot
    So you okay if I can arrange a swap Jimmy.
×
×
  • Create New...