Jump to content

Phantom

Members
  • Content Count

    6,724
  • Joined

  • Last visited

  • Days Won

    11

Everything posted by Phantom

  1. Thanks Gentlemen ......... and Bill I'm hoping to do a lot more in the near future, it's just a pain in the butt getting back to my permissions, bit better now I've got a push bike but that hill is a 'kin killer in places, not to mention the bloomin main road I have to travel, scarry as ell! Just need a new warm liner for my bivvi bag and I'll do a few overnight sessions in the cemetery I also want to keep an eye on the paddock because the instant I put the lamps on the paddock cleared of jewels! I've got both white and red Ultrafires on the scope now. I highly suspect its being p
  2. Bill, what you fail to realise is that was an A4 sheet pinned to that board -------- You let go of your precious rifle, shame on you Sir Glad the gun, scope and yourself are just a little bumped and not seriously injured. Tony
  3. Now go wash your dirty minds out Hi Guy's, Not been around to much with the year being as sh!tty as it has been so far, nor have I done much in the way of hunting this year. Probably only five or six trips since January. Well I decided to go visit my youngest daughter and my permissions on Wednesday and stay overnight at my ex-wifes place. I popped into BunnyLand (Mrs G's) and spent three hours there, only one bunny appeared and it looked like it was recovering from Myxie (eyes open and scabby, not closed and pussie) I left it alone so that any future offspring of this will have
  4. All over the ruddy place Bill Up Hill Down, Dale and that's without even leaving the fecking apparment! Thanks for asking Tony
  5. Nice work Bill. Hoping to slot a bunny or two tomorrow myself Cheer for the email BTW Tony
  6. 730 with 19 grain pellets about 23.67 ft/lbs 630 with 25 grain about 22.04 ft/lbs More than enough to do the job on such a little hog Nice find Si, I saw one clip from the Gamo USA site where they were using the Gamo PBA pellets in the Hunter Extreme, the hogs they were knocking over were some big buggers indeed Tony ps Welcome home
  7. If it's a RAT and it's NOT BLACK then it needs a pellet in the front 3rd of its body Grey, Brown, Pink or Sky Blue Pink with Yellow dots on, it needs exterminating. A co2 will offer reasonable results if you are good enough! A PCP such as the S200 is awsome! Used mine last night; I took a "Quatering" shot on a bunny at 45 yards last night, In through the eye, out through the back of the head, it was dead before its legs gave way A multi shot rifle is the best for rodents unless you are going to bait them Tony
  8. Give these guys a ring http://www.gunspares.co.uk/shopdisplaycategories.asp?id=24064&cat=Webley Tony
  9. I'll have a word with Paddy at the UBC, we do our own merchandise, Caps, shirts, hoodies cups pens badges, sew on patches etc... Tony
  10. Awsome story as ever Stealthy, now bend over Tony
  11. Hello Mark and welcome to the section The Webly mags can be found here http://www.gunspares.co.uk/shopdisplayproducts.asp?id=24902&cat=Webley And the fill pressure for most of the AA range is 180 to 190 bar for best performance Tony
  12. You can easily get the adaptor for a unf threaded silencer. The Twink is probabley the best on the market for airguns Tony
  13. I have a MK2 now in a MK3 stock. I fill to 180ish and I tend to get about 40 shots at 11.5 ft/lbs before I need to considder hold over to compensate for drop in pressure. I wouldn't have thought a change of seals would alter the shot count though, unless you have nipped the seal when screwing the end cap of the air cylinder and its got a slight leak. Thats about the only thing I can think of. Tony
  14. 40 shots at close to the limit is about what I would expect from then on its down to to marksmanship skills. What are you filling the S200 AC to? Tony
  15. http://www.gunspares.co.uk/shopdisplayproducts.asp?id=24271&cat=Paratrooper Try those people, great customer services and very helpful on the phone Glad to help Tony
  16. Look like its missing the Tubeular magazine from the top of the action though. Chambers do spares for the gun. Tony
  17. ASI (El Gamo) Paratrooper Quite a rarity these days, mostly late 70's-mid 's Tony
  18. Non AO are set at 100 yards. I always said "Nah" dont really need it, then I tried one. Now both my hunting rifles have them and I have a non AO scope that has been reparallaxed to about 30 yards or so. Tony
  19. I do stalk them, but very rarely. I usually find a place that gives me a good view of as many warrens as possible and the entrances that they use to come through the fences. Then I lay up and snipe them as they show. You will be surprised how crafty a fox can be and just how small a place is needed for one to crawl through. I once shot a bunny and almost as it hit the ground a fox had jumped into the cemy, grabbed the bunny and ran off with it, litterally a few yards in front of me. Tony
  20. Good Man Nice one Craig All here to help no matter what the rest of THL says we are eh? :notworthy: Tony
  21. Now then Sir Archie, Looks like the Gods are all comming together again now :gunsmilie: Do not forget I need your postal address so that I may return your sacred book on the lifestyle and humble execution of the rodents with the scaly tails and big tooshy pegs As relrevant today as it was when first written over a century ago :notworthy: Tony
  22. Excellent my fellow Grave Yard Reaper Don't forget to take pix next time you are out You mention the "Tranquillity" of the place, funnily enough my boneyard is only a few hundred feet from the main route into and out of Hull. Yet I find it so relaxing and peaceful Don't know why, perhaps its my family that is in there (well my ex wifes mom, dad and two brothers). Funnily enough, I feel "At Home" and relaxed when I am there; not sure why though :hmm:I know that you can't shoot there during the day where as I can (as long as there isn't any burials that day). But winter, spring summ
  23. As far as price goes, best fittings aint too bad, HOWEVER......... They are charging £3.00 for a part that PIR TEK (all over the country) are charging .37p (+vat) for! I found Pir Tek (suppliers of High Pressure equipment to almost every industry on the planet) as I went past it on the bus one day and noticed their sign. Got off at the next stop and walked back in total I got 2 of everything I needed that day for less than £2.00 inc vat. To buy the same parts from the RFD was going to cost me over £25.00 What happens is that people don't realise is these "Specialised Parts" for
×
×
  • Create New...