Ideally you need to change the breech for an all steel one and change the transfer port. That will be the biggest cost initially. The rest is just bling as you go along.
Plenty of parts for them on evilbay but Gmac will be the place to shop.
If you do replace the breech it is important you use the correct sized screwdriver. The screw located beneath the pellet probe is tiny and has a habit of the head snapping. You will have fun and games if that happens.
http://www.gmaccustomparts.com/epages/BT3197.mobile/en_GB/?ObjectPath=/Shops/BT3197/Categories/Crosman_2250b&Locale=en_GB
Nothing wrong with the S10. I have an unmolested mk2, Had it around 15 years and its never let me down.
Taken some good numbers with it over the years.
They snap easy because the barrel retaining screw which secures it to the door passes through the weakest part of the barrel. In fact the screw hole itself is the weak link on the eurolocks.
Your right Gin. All info that is up on this thread was provided by the Kellys.
Not the smartest thing to do if there even is an active police investigation ongoing, Is to plaster it all over the internet.
My account was in brief. Just wait until Quentin tarrintino gets hold of this biopic and directs something worthy of an Oscar.
Can just picture it now.....
Set in the rolling landscape of up north. Moors. Fells. Trees and shit.
The villain gets set upon by two tattooed scallys. Beaten and left for dead. There's the drama. You take pity on the guy.
The action starts with quad bikes and helicopters!!
Then back to the drama. Hospital visit and a miraculous speedy recovery that would make Stephen segal look like an amateur.
More action then with armed attacks and speedy getaways in a