Jump to content

Buster321c

Members
 View Profile  See their activity

  • Content Count

    3,145

  • Joined

  • Last visited

  • Days Won

    3

 Content Type 

Everything posted by Buster321c

  1. Buster321c
    Its just a duplex mate , plain old fashioned duplex . I hope the rabbits are about too mate , ive given the permission a rest for a while so they should be out in number , especially this time of year . Cheers guys , check in later
  2. Buster321c
    Nice one lads , just a bit too far im afraid , its an hour and a half drive . Probably just go to my permission , but cheers for the heads up , and be good
  3. Buster321c
    Cheers Wurz , You`ve been good to me mate , it wont go forgotten
  4. Buster321c
    Ive been itching to get out for a while , and as the hunting combo has the trusty Hawke Map Pro ( which i do like ) i thought it time for a change . So after a bit of a clean and a double check of a few things i got the new / old scope out . Its an Optima Super Moonlighter , one ive been after for a while , and it has taken the place of the Hawke . I`ll see how it performs in the low level light, and in general when it goes out on the permission tommorow . And just to `keep my eye in` , the MPR will be for an airing , and drop a few long range coneys given the opportunity .
  5. Buster321c
    Gamo CF-20 In .22 , fair condition , in a slip, seems ok to me . £85 collected , Birmingham area . No sensible offer refused .
  6. Buster321c
    Simple , its C Gen
  7. Buster321c
    If so , where abouts? targets or rabbits ? At a bit of a loose end ..........
  8. Buster321c
    http://www.(!64.56:886/pages/John-Bowketts-Official-Fan-page/178352388876311?sk=wall
  9. Buster321c
    Just be aware that re-chargeable`s run at 3.7v and not the 3v a non rechargable would . This is ok normally , but some LED emitters will run a bit too hot and basically `Burn out` . So as a foot note , check that you ok with re-chargeables .
  10. Buster321c
    James , a sling will fit onto a bi-pod or just the stud . You will need one in the butt also . I also have an S410k in .177 and its a cracker , good luck with it , atb Buster
  11. Buster321c
    Personally i remove the `S484` `0` ring on my rifles . This is the `o` ring that gives the barrel its stability in the barrel band . I find that it will `float` quite happily and this also gives it a little room to allow for the odd `knock` here and there .
  12. Buster321c

    badgers

    Buster321c replied to nod's topic in General Talk

    Seen two myself this week , sadly within half a mile of each other .
  13. Buster321c
    Big up yaself !!!! I SERIOUSLY hope thats a joke ............
  14. Buster321c
    Well said , i just wish more people thought like this , than trying to push it to the limits
  15. Buster321c
    Great pics Al , very clear , nice one
  16. Buster321c
    Ive seen it done by a german guy , not the one you speak of ( i dont think ) . Its ok i guess , just needs the stock modifing and your sorted , not sure its viable at that price though .
  17. Buster321c
    Size ??
  18. Buster321c
    Well done boys , good times
  19. Buster321c
    Well doen guys , good to see this kinda stuff
  20. Buster321c
    Good going guys , nice one
  21. Buster321c
    Nice going Wurz In comming
  22. Buster321c
    Which one is it Rossy ? Would it be the Transfer port seal ? S427 ? This also goes between the `dog leg ` and the cylinder , its the same seal both sides . www.air-arms.co.uk/PDF/S400%20ISS12.pdf Just let me know and give me a PM of the address and i`ll get what ever you need sent out buddy Happy fiddling , Buster
  23. Buster321c
    Get he TXHC , you won`t be dissapointed
  24. Buster321c

    drug test

    Buster321c replied to jack260's topic in General Talk

  25. Buster321c
    Of course i am mate You should give Astro , or Decker a PM over there they can sort you out atb Buster
×
×
  • Create New...