Jump to content

davyt63

Donator
 View Profile  See their activity

  • Content Count

    8,326

  • Joined

  • Last visited

  • Days Won

    9

 Content Type 

Everything posted by davyt63

  1. davyt63
    hi buddy you need to contact AA after Christmas,give them the batch number,and i am sure they will send you some FOC,please post the batch number here,so we can recognise it or match it i know some batches have been found to be bad,i have experienced this myself,with .177 cal. but recently i bought a 10 tin sleeve,and they work fine in my HW97. PS.got your PM i will ring you when i get some free time,thanks for the offer
  2. davyt63
    seen si's vid doing his old hw100s off the bipod and boy was it consistent!! just got the results from yesterday morning outside C'mon then lets have em
  3. davyt63
    hi buddy i don't hold out any luck in your quest to find a HW/AA for £150,if you can up your budget buy £150 you can be assured of a HW/AA probably scoped? i have found this though on the AAOC http://www.airarmsownersclub.com/viewtopic.php?f=4&t=50326 good luck buddy,nice post to
  4. davyt63
    hi Skott artificial light is a you might want to make your self a jig,to sit the rifle in,each time you test it.make sure its between the sensors,and make sure its the right distance away from the sensors,Si uses one and we get correct readings due to the correct ways to use it oh yes! they are erratic readings
  5. davyt63
    very nice indeed !
  6. davyt63
    hi Nigel shed is coming on fine,just have to get the power sorted now & paint the ceiling,if you need to borrow my combro just pop over and pick it up buddy. Daystate review is not going to good! i want to show a group at 35 yards,but i am struggling for accuracy at the moment,i think the scope may have been damaged in transit,so going to try one of my own scopes and just have to wait for the better conditionds. i don't see the point in doing a 20 yard group like other YT channels have done,totally pointless! i want to see what it can group like at 35yds so unfortunately th
  7. davyt63
    hi Alex i had a good Richter Optic 3-9x50 AOE on one of my past hw100's,it served me very well for the amount i paid for it not sure they still sell them? i mainly used it for hunting and plinking. be careful buying of ebay,as they are usually copies,so i have read!
  8. davyt63
    well that's my zero sorted plus a nice curry to boot
  9. davyt63
    hi Tony this may help you out buddy http://www.thehuntinglife.com/forums/topic/181320-pellet-swap-opportunity/ for got to add,try a lighter pellet brand first,they seem to work better in spring powered rifles
  10. davyt63
    thanks guys,i will pass on to Si to recent bad weather and the Christmas break has kept us indoors and unable to get new footage! but look out for 2014
  11. davyt63
    nice one Mac,looks like its in good condition nice Knife & case to boot
  12. davyt63
    hi buddy i can relate to your anticipation,but i just squeeze em and guess i could imagine a few of the above posters have a little squeeze or peek we are all kids at heart when Christmas is upon us! but i think you need to grow a pair and fess up to the missus,i am sure she will see the funny side of it,or wrap the R10 around your head,either way you would at least get to touch it PS. poor dogs!
  13. davyt63
    hi Mac had a good one to Mac,thanks buddy considering what you have been through of late,i wish you a healthy & prosperous new year! and a great shooting 2014
  14. davyt63
    VHTV would like to wish all our friends & THL members & subscribers a Merry Christmas & Happy New year Davy & Si
  15. davyt63
    Merry Christmas Tom ,& a Happy New year
  16. davyt63
    Hi Steve welcome to the mad house, you mentioned a range open 3 days a week, I am also from Swindon ,could I ask where it is? Or do you have a link?
  17. davyt63
    that will be the loctite they put on it,i use a heat gun to melt the glue,then sharp tap and bingo!
  18. davyt63
    why didnt he turn it down for you? was he actualy a gun smith? I guess he wasn't a gunsmith, the thing is the shop in question are very well respected in my area, also they have a few staff members, maybes it's the time of year or they just couldn't be bothered? I also have a bsa r 10 that was a little low at only 9.4 lbs with accupells and again they had to send it to bsa to have it tuned, this was under warranty. hi jin if you buy a rifle from a shop,they send it back to the manufacturer,because its still under warranty,its not there problem! it has to go back to the manufacturer.
  19. davyt63
    nice one skott
  20. davyt63
    Nice to see fellow member's showing kindness to one another, welldone lads!
  21. davyt63
    if your s410 is pre AT then you can service it yourself,its pretty easy to do take a look at the serial number,then ring Air Arms they will give you its history,i usually set my PCP's at 11.2ft/lbs you want it at 565/585 fps and try not to let it go under 535/545 from memory the only special tool to use is circlip pliers,the rest is all allen keys & screw driver. i think AA charge £90.00 for a service,but there might be some one close to you who will do it.i am to far from you to do it,try joining an air gun club,there maybe someone there who can help
  22. davyt63
    why didnt he turn it down for you? was he actualy a gun smith? I guess he wasn't a gunsmith, the thing is the shop in question are very well respected in my area, also they have a few staff members, maybes it's the time of year or they just couldn't be bothered? I also have a bsa r 10 that was a little low at only 9.4 lbs with accupells and again they had to send it to bsa to have it tuned, this was under warranty. hi jin if you buy a rifle from a shop,they send it back to the manufacturer,because its still under warranty,its not there problem! it has to go back to the manufacturer.
  23. davyt63
    if i was buying a second hand PCP what i would ask is 1.can we do a face to face deal WHY? so i can test it 2.ask for the serial number WHY? so i can check its history,via a phone call to the manufacturer 3.ask to see a recent chronograph reading WHY? to make sure what i am buying is legal 4.ask when was it last serviced WHY? if its recent then i won't have to fork out more dosh 5.what ft/lbs is it putting out
  24. davyt63
    i am not having a go buddy,just stating a difference I know that mate, sorry if it sounded that way...you know me by now Im not intentionally calling other "Pro Tuners" for what they do/charge for either.... Just with it being quite common place nowadays, Im just interested in what people would recognise as a tune
  25. davyt63
    here ya go buddy http://airgun-hq.co.uk/airgunhq/Tools/Calculators/tabid/54/Default.aspx
×
×
  • Create New...