Jump to content

davyt63

Donator
 View Profile  See their activity

  • Content Count

    8,326

  • Joined

  • Last visited

  • Days Won

    9

 Content Type 

Everything posted by davyt63

  1. davyt63
    why didnt he turn it down for you? was he actualy a gun smith? I guess he wasn't a gunsmith, the thing is the shop in question are very well respected in my area, also they have a few staff members, maybes it's the time of year or they just couldn't be bothered? I also have a bsa r 10 that was a little low at only 9.4 lbs with accupells and again they had to send it to bsa to have it tuned, this was under warranty. hi jin if you buy a rifle from a shop,they send it back to the manufacturer,because its still under warranty,its not there problem! it has to go back to the manufactur
  2. davyt63
    i am not having a go buddy,just stating a difference
  3. davyt63
    nice one buddy,and good reading to boot well done!
  4. davyt63
  5. davyt63
    its not a tune! its fettling Call it what you want but definition of a tune is to make fine adjustments to (an engine, machine, etc) to obtain optimum performance if you want to play on words and even Darryl called it his tune it is fettling end of,fine adjustments is right,re-greasing,de-buring,polishing is home DIY fettling. there is no lathe work involved in Darryl's tune,which all the professional tuners do,hence it costing ££££'s what darryl has shown is his way of fettling,i may stand corrected "but i doubt it" this is no where near as much work that a professi
  6. davyt63
    nice fettling buddy,and as shows via the chrono what can be achieved from a polish,and a re-grease going to watch it again,as had no sound keep the vids coming
  7. davyt63
    its not a tune! its fettling
  8. davyt63
    hi Darryl you need to get a cordless drill,its a lot easier.put the piston guide in the drill tighten chuck,wet n dry between fore finger and thumb,and squeeze the trigger slowly till desired polish acquired! the inside of the compression tube,go to a diy store ,buy some spare rad rollers,wrap the wet n dry around it,slide a 6mm threaded bar inside the roller,insert into drill bingo! all polished in seconds. or just buy a polishing wheel keep the vids coming
  9. davyt63
    no problem buddy
  10. davyt63
    hi MM have a look here http://www.thehuntinglife.com/forums/topic/308602-new-rifle-dilemar/
  11. davyt63
  12. davyt63
    Hi Curtis i enjoyed that review buddy,thanks for the plug for VHTV. regards of tuning there are plenty good tuners out there,and i have only herd good things of WW tunes,Simon and I use SFS as we are happy with the results who ever you decided to get it tuned by,it will be a different rifle buddy,i look forward to the accuracy review,you might need to do a accuracy test before and after ? i will be at Nelson next Saturday,for a recky as a venue for future air gun forum meets,so if your about would be nice to have a look at your set up and maybe a plink together ?
  13. davyt63
    ITS NOT A DICK MEASURING CONTEST!
  14. davyt63
    confession of a noodle arm club member
  15. davyt63
    Hi Russ what do you want to do, f**k it or shoot it? give it a wipe over with a oily rag before and after you come oops! sorry use!
  16. davyt63
    Hi Taito cool we will see you there on the 02/03/2014,its the 7th round of the southern hunter series,and ford is the host. we can catch up and see how your getting on with the Chieftain
  17. davyt63
    its looking good buddy
  18. davyt63
    i stand corrected skott,its as you describe it buddy,memo to myself,make sure i have my glasses on next time i look at the Chieftain
  19. davyt63
    hi OSS will defo check,i can shoot it both sides,as proved in round 2 @ WLR,but "pardon the pun" will double check
  20. davyt63
    hi taito it will depend on what you are going to use it for ? if you want one for plinking then get the 97 .177 if you want one for competition & hunting then the Chieftain is your rifle,i cant recommend this enough,a couple of weeks ago i hit 3 small disc's the size of a 5p coin @ 65yds in consecutive shots,last Sunday i hit 3 bottle tops at 65yds,in four shots there was a bit of wind,but still good consistency from a SFS tuned rifle. and my average HFT score has increased,due to using the Chieftain. first time out with it i got a 57 score out of 60, i average a 45 with the T
  21. davyt63
    enjoy!
  22. davyt63
    looking good buddy
  23. davyt63
    hi Daz nice looking TX buddy
  24. davyt63
    hi Aaron thanks buddy right now i feel i cant miss a thing! but that's all well and good,but as you know your self, i have to range the target correctly and if! it is a still day i should be ok if i hit that elevated target that John got last year i will be happy
  25. davyt63
    as i have mentioned chris "QC" and if you want the best of both worlds,for hunting and target.then most have there air guns tuned!
×
×
  • Create New...