Jump to content

ditchman

Members
 View Profile  See their activity

  • Content Count

    1,841

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by ditchman

  1. ditchman
    cut and shaped the blade on my old slow running 1930 linnisher...gave it a full scandi cut/grind both sides............and started to fit ebony scales to it..........
  2. ditchman
    those /these knives ...can all be done with a small ammount of tools ....and well within the skill set of all folk on this forum..........................have a go ....ask questions ..
  3. ditchman
    cheers............it didnt get a soak............just into the forge long and slow...and air cooled...then annealed as i said.....which has worked out fine.......its had a years hard use since i finished it...no probs yet prefer to work with O1 tho......
  4. ditchman
    cant quite get them in order....but you get the idea.....my mate dave sent me a bit of D2....which is nice to work ...nice and soft....and when you harden it you bring it to temperature and let air harden....you dont quench it in water or oil....you get very little wharp using that spec steel....then it was annealed later as i will show............ ditch
  5. ditchman
    is that the one uncle he had shot with an anti aircraft gun............?
  6. ditchman
    after i post this thread you will all suddenly realise that i am a hopeless lost case...in short a muppet..........these sort of disasters really float my boat....the knife was and is very special to someone and they didnt want to throw it away...so they sent it to me for a larf.........................i will post later as i need to do some shoppin..............
  7. ditchman
    thats gross..........must be grim up north to do that............we use spagnum moss in norfick down here......
  8. ditchman
    hi there my man....yup ...still taking carp air rifles and getting them to look nice and fire well....did you see the last Merc "S" that i did ....i spoke to the bloke i did it for last week and he regulary chrono's it and it has settled down at 11.4ft/lbs and is pin point accuate now havnt qite crossed the dark side yet but after being banned twice and filled up on points...for evading the swear filter and sexually inuendo's i thought i would start having a wander around this forum which i joined in 2014....in the format it had then i found it a bit difficult to navigate around....so tha
  9. ditchman
    does that mean ive got covid-19 again....................no wonder folk buy so much toilet paper....?
  10. ditchman
    the majority i make are either re-done new opinels or old rusty favourites that their owners want something a little special.....it worth it cause the steel is good quality.....i prefer to work on the non-stainless ones tho......... the other knives i do are total rebuilds of broken pocket knives....you know the sort ...."grandads old sheeps foot paring knife that was handed down to son ..then grandson...blade got thin and broke.....one gutted bloke...... i will show you what i mean tomorrow with some stuff ive done in the last year ...but posted "errr shall we say else where....?"
  11. ditchman
    just to finish off this thread this is how i fix the pommel on as i mentioned earlier..........that aint never going to come orf?
  12. ditchman
    thanks ...........i try not to make them perfect.its more how they feel in your hand.....i try to make them look like a tool not a weapon....... im trying to sort out the pics from the rebuilding of the horse knife...so i will put them up later..?
  13. ditchman
    i have an old tile cutter with a diamond edged blade on it ...so i took that off and put a cutting disc on it....mark it up by eye ..then push it onto the cutting disc......i use the same for cutting the excess off the metal...bit at a time so as not to melt the resin.....when it gets hottish i put it onto a tissue soaked in water (see pic att') then the slot for the blade is done using a disc cutter (mini)..................all of it has to be done by eye as all the antler points are different....thats why every knife is unique... i dont super clean the handle as i like to see
  14. ditchman
    i wont put many more pics up as i have bloody fawsands of them....but this shows the sort of procedure it goes thro.....the brass or bronze (sometimes ) pommel gets drilled and pinned and the pins are silver soldered into the metal then the antler is drilled out and the whole thing is set in epoxy.......... what i will do is start another thread maybe 2moz on the re-building of the Boer War pattern horse knife what was give to me to do up........... cheers
  15. ditchman
    cheers.................. one of the reasons i slowed down on making them ....is it was getting really hard to find good interesting Red deer antler..........i did have a beautiful point that i was saving for myself...it was twisted and knobbly............so i started work on it..............and ended up cutting it too short............i cursed and swore and sobbed my heart out as it was a real special piece ....then shoved it in the bandsaw and cut it up in a dozen pieces and binned it...?
  16. ditchman
    Proberly a few of you know me from another website.....either for my bad spelling or raw language....i does mek stuff...when im board...last couple of years i made dozens of these dun up opinels and give em away.......... some of them are real quirky.........i recently rebuilt a Boer War offices horse knife....one of the most beautiful multi tools i have ever seen ..........if you are interested in that sort of stuff give me the nod and i will put the thread up........ ditch
  17. ditchman
    yup like that.......what steel are you using ? ditch
  18. ditchman
    do you mean range insofar as the shot will carry or the effective killing range as per type of cartridge used ?
  19. ditchman
    if you contact your local steel stockist, you can buy steel rod (4mm thick) in 3m lengths in most thicknesses...then buy heavy duty electrical connectors, all you need is a hacksaw and a file, cut two short pieces ..bend them to spike the wings and connect them to the steel rod using the electrical connectors... jobs a gooden.....if you want to make it even better, cut a piece of steel tube....8 or so inches and put that in the ground first then put the bouncer/floater into the steel tube, ...if there is wind it will constantly turn into the wind , giving extra movement if you have a c
  20. ditchman
    another way to resize is choose pic e-mail to youself..it should resize to under 150 save click on files on post find photo click open click attatch on post jobs a gooden
  21. ditchman
    cheers my dear,,,,,ive posted den....and he has the instructions........i really need to get out to where the birds are at, am suffering from withdrawal symtoms ditch
  22. ditchman
    Just to say hi....im a life long pigeonshooter, although i havnt pulled the trigger since august ....cause there aint nothing about, they are returning but very slowly, i have several dogs, and make my own decoying gear....at the moment im looking for a 200 seris scrap defender engine to rebuild to replace the old turbo desiel engine, that is gasping its last........so if any of you have a 200 def-eng...give us a shout ditchman
×
×
  • Create New...