Jump to content

CZ457 SYNTHETIC UPDATE

Rimfire Rifles Freedom
Followers 2

Recommended Posts

Rimfire Rifles Freedom

Rimfire Rifles Freedom 17

Posted
  • Author
Posted
39 minutes ago, samboy said:

Have done everything you have said with the 452 but could be short stroking the bolt. But the spent cases take some prising out.

The 457 has not had much use so shouldn't be dirty but i will try new ammo and report back in a couple of weeks.

Yes, an update would be useful thanks.Same with 457 possibly being short stroked?

Link to post

Rimfire Rifles Freedom

Rimfire Rifles Freedom 17

Posted
  • Author
Posted
40 minutes ago, FLATTOP said:

I’ve had a 452 .17 for the past 12 years plus it’s always delivered very accurate results when I upgrade it will be another Cz in synthetic. 

The ultimate rabbit gun.

1D6E828D-EF15-43D5-8F96-40ED26C87A6D.jpeg.37b5ef88381f41aac8ae384fca5d6815.jpeg

Nice shooting.?? and nice looking rifle.Having had a few rifles with walnut stocks I do actually prefer a good synthetic stock.The 457 Synthetic stock is basic but well thought out in that it is very comfortable which allows for a correct cheek weld.

  • Like 1
Link to post
Rimfire Rifles Freedom

Rimfire Rifles Freedom 17

Posted
  • Author
Posted (edited)
4 hours ago, samboy said:

Put 20 Eley subs through 457 today. No problem at all. Will try Norma and CCI next week.

I know 20 is not many but the winnies would of stuck after 1 or 2. Eley's seemed a tad thinner than the winnies.

Might be my eyes.

Samboy, the cases on the Winchester 42 grain hollow point I believe are a little bit longer than a typical subsonic .22lr hollow point. I read this on the Winchester website a few years ago if memory serves.I am not 100% certain about this, but think this is correct.

I am not surprised the Eley are extracting without issue and so will the Norma and CCI be without issue as the 457 is very reliable.

I would not use the Winchesters.

Edited by Rimfire Rifles Freedom
Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
Followers 2
Go to topic listing

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • Rimfire Rifles Freedom
      RWS Subsonic Hollow Points 40 Grain
      By Rimfire Rifles Freedom
      Hello all.?
      Just an update as it has been a while.I have been looking for a subsonic .22LR hollow point that shoots well from a cold clean bore and have recently started using RWS subs which do well, typically from the first shot..I have used a few different brands of subsonic H.P.s and they all group quite well after 5 or so fouling shots, but RWS like the cold clean bore,needless to say I am a happy and for me, decent shooting.?.I have used the RWS before in the old Annie 1416 DG and it was equally consistent in that rifle.
      A couple of typical below all from a cold clean bore..My scope is a Hawke Vantage x2 -x7 32mm A.O. with illuminated reticle which is a great field scope but lacks magnification for target shooting so is sometimes difficult to deduce if a shot has been pulled, but I love the scope.
      Have a good weekend all.?


    • Rimfire Rifles Freedom
      Post removed by O.P.
      By Rimfire Rifles Freedom
      Post removed by O.P.
       
       
    • Rimfire Rifles Freedom
      CZ457 SYNTHETIC
      By Rimfire Rifles Freedom
      Hi all? My CZ457 Synthetic.This is a good hunting rifle, easy to shoot well and stress free to operate.
      If you have a CZ457 Synthetic please stop by the facebook page 'CZ457 Synthetic, In The Field'.This is a brand new page for owner's of the CZ457 Synthetic.
      Please see the link below.
      Facebook Groups
      WWW.(!64.56:886 CZ 457 Synthetic, In The Field has 21 members. A small , friendly U.K. based group for CZ457 Synthetic owners who enjoy being out in nature hunting / vermin... Thanks?
        P.S. I hope it is ok to post the facebook link.Apologies if not, please delete the link.

    • Baldcoot
      Zeroing in the wind
      By Baldcoot
      Well new Pulsar Xq50 from someone called Blackwoods outdoors (Cheers )arrived in the week. Fitted to the Cz452 in .22.
      At work twitch ,twitch tweeetch.
      Weather carp ,forecast carp sod it up to the farm this am .Home made target ,2 pieces of aluminium tape set at 53 metres .
      First shot and not even on the board ??.
      Oh well down to 30m now we're in low and right.Into zero mode adjusting  elevation and windage as per you tube video .
      First shot slightly off ,quick tweak and yeah. Back to the fence and 53 meters, quick 2 shots yeah on target so chuff it and empty the mag  ??.
      Rabbit head size group at this distance is plenty. Had a mooch but no good 7 joggers, countless dog walkers so off home till dark o clock in the week.
       
       



    • Rimfireboy!
      Flobert
      By Rimfireboy!
      If anyone’s interested, I decided to pattern and compare .22 and 9mm flobert shotshells. Using my 14 inch Anschütz, I shot a .22 Winchester superX #12 shot at a rat target at five yards to see if it would likely be effective at that range. To compare using my 24 inch Manu-Arm bolt action, I shot 9mm fiocchi #6 shot at the same range, and 9mm rws acorn brand #10 at the same range. I went on to extend the range of the 9mm flobert’s at ten, fifteen and twenty yards for comparison. Here’s the results.....










×
×
  • Create New...