Jump to content

Recent Sessions.


Recommended Posts


Nice shooting U.

I've just been given a 900, what's your opinion pal?

They are ok for the money!

However a simple trigger job is needed and usually some relieving at the breach to aid pushing the pellet in the barrel.

 

Good plinking rifle.

 

U.

  • Like 1
Link to post

Hi moley.

 

I usually make meatloaf with woodies and squirrel usually goes to ferreters.

Sometimes I will cook one.

 

The hatsan 900 simply has a blanking screw where other models with the same trigger have a longer screw to offer all be it limited adjustment.

The adjuster simply adjust sear engagement so caution is needed so it does not become unstable. That will only happen if one tries to make it a match grade trigger via this screw alone!

Replace the screw with one around 6mm long, IIRC it is m3 standard pitch.

 

Stoning the Sears or smoothing the surfaces make a difference too and is easy to do.

The long reach is a pain but manageable.

It can be improved by drilling across the pressed steel trigger high up in the unit and cut from the back of the blade to the drilled hole and then bend the blade backwards closing the cut you just made.

Recut the slot and bend again. Makes for better reach.

 

U.

Edited by Underdog
  • Like 2
Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...