Jump to content

DanAdams

Members
 View Profile  See their activity

  • Content Count

    164

  • Joined

  • Last visited

 Content Type 

Everything posted by DanAdams

  1. DanAdams
    Both of them look okay strength wise, I'd personally go for the one on the right, looks like the favored bulldog rabbiting spade, if they are not to much it would be worth it if there getting on into the bulldog price range I would go for the bulldog range but that's just my personal preference, ATB Dan
  2. DanAdams
    Hi mate what's the most you are looking to spend and what will it be used for? (targets or small vermin?) ATB Dan
  3. DanAdams
    Might order one of them then! Has it got a tight or quite spread out beam? Thanks,ATB Dan
  4. DanAdams
    Hi mate do you still have the monocular? What sort of range does it do? I might be able to buy it off you depending wether I can shift my crosser tomorrow for some cash, thanks, ATB Dan
  5. DanAdams
    Hi mate do you still have this and if you do, what is the BSA scope you said you will include thanks, ATB Dan
  6. DanAdams
    It's fine by any chance is this the topic?: http://www.thehuntinglife.com/forums/topic/283045-testing-and-filling-a-divers-bottle/ was it PIL? ATB Dan
  7. DanAdams
    Do you have a swimming/leisure centre near you?, one near me where the divers meet, fill them up for like a couple of quid, worth a try! ATB Dan
  8. DanAdams
    Welcome to site mate ATB Dan
  9. DanAdams

    Lamping

    DanAdams replied to steven35's topic in General Talk

    Shrewsbury in Shropshire? If yes where abouts? cheers Dan
  10. DanAdams
    Haven't use the hunting life on IPhone but if you go on your messages and go on all messages, select all and delete? ATB Dan
  11. DanAdams

    Lamps

    DanAdams replied to DanAdams's topic in Hunting Equipment

    Does anyone have or used one of these or know what sort of beam i would get from one of these:http://www.uttings.co.uk/Product/757/115153/buffalo-river-cree-led-hand-held-lamp-brlt61led12v/
  12. DanAdams
    Do you mean it's loose or it pulls when you fire? My one did the same when I fired it. ATB Dan
  13. DanAdams
    It might be the hammer spring like you said and it's a pcp isn't it? How much air do you fill it with cause you will get the best power 10bar below the manufacturers recommendation and if you fill it it up 20 bar over it can reduce the power by up to 40%. Other than that I have no idea, others that have the gun will be more helpful. ATB with it Dan
  14. DanAdams
    Where about's are you mate cause if you were close me and dad would knock one up for you ATB Dan
  15. DanAdams
    http://www.thehuntinglife.com/how-to-build-a-larsen-trap/ have a look at this. ATB Dan
  16. DanAdams
    A larsen trap are quite effective and easy to build for very little! ATB Dan
  17. DanAdams

    Lamps

    DanAdams replied to DanAdams's topic in Hunting Equipment

    Cheers, ATB Dan
  18. DanAdams
    For me it worked out cheaper to get materials and build my own and it meant I could have how I wanted. If you wanted to buy a pre built or flatpack sort of one I would say have a look on places like gumtree, preloved ect. Or garden centres sell large chicken runs? There are lads on here that would make you one if you paid them, can't think of any names off the top of my head, if i remember any i'll tell you. ATB Dan
  19. DanAdams
    Have you got any photos of it please thanks Dan
  20. DanAdams

    Lamps

    DanAdams posted a topic in Hunting Equipment

    Hi all, looking to set up a cheap lamping kit. Just wondering if the lamp i was to buy had a lead with a cigar adapter on it could i cut the adapter off, strip the pvc liner off slightly and have pos and neg wires to attach to battery?? Does anyone know about these:http://www.amazon.co.uk/Riverside-Outdoor-Battery-Adaptor-Connect/dp/B00BBR9OCQ -Does the cigar adapter go into the like black tube and means i wouldn't have to take the adapter off??? Sorry for dum questions thanks in advance Dan
  21. DanAdams
    Do you reckon there worth getting? Thanks Dan
  22. DanAdams
    I started mine the first season so about 6 months but they have the instinct to work rabbit so you can start them quite early. Most concentrate more on bonding with them and letting them play in tubes/pipes to get them used to it when their young. It usually helps for them to work with an experienced ferret, they pick it up quicker. Growing wise I'm pretty sure it's about 20 weeks to be fully grown but not 100% sure. ATB Dan
  23. DanAdams
    ATB with them
  24. DanAdams
    Cheers for the replies. Appreciate your opinions. ATB Dan
  25. DanAdams
    Thanks again every one
×
×
  • Create New...