Jump to content

What's Happened To Weihrauch?


Recommended Posts

I recently decided to get an air rifle for the first time since my teens. I wanted to get either the pro-sport or a tx, but decided I couldn't really justify 800 to 1000 euros or more getting the full kit, gun, scope etc etc so plumped for the 97k instead. It wouldn't be used that much anyway.

 

Well I've just had 2 faulty bran new guns in a row. First one had a broken spring, so took that back & exchanged. I then couldn't get the new one shooting right, so they sent me a new scope.......still no good! At this point Im starting to really doubt myself..haha, but took it back & have just been informed today that that one had some engineering issue......so we are on gun 3 now!

 

Is this normal now with weihrauch or have I just been incredibly unlucky?

Link to post

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

Don't let it put you off mate. In my minimal experience of Weihrauch springers (hw30s & hw97kt) they've been absolutely spot on

On a positive side Accip you're witnessing excellent after sales service, every cloud??

Mac honestly it was uber smooth and quiet straight out of the box, it was producing just about 11ftlbs, I stripped and re lubed it as I do with any new springer, the quality of the internals has to be

Posted Images

On a positive side Accip you're witnessing excellent after sales service, every cloud

Yeh I can't knock the guy in the shop, an English guy who owns a shop in holland.......but under the circumstances I wouldn't expect anything less.

 

.....& the fac level is a bonus I suppose :-)

Edited by Accip74
  • Like 1
Link to post

 

On all new guns you need to clean inside of the barrel before putting any pellets down it

Yeh, but I'm not sure what that has to do with 2 faulty guns in a row?

 

The first one is faulty without a doubt but if you haven't cleaned the barrel with a pull through , you will still have the factory grease inside the barrel causing it to shoot like a shotgun

  • Like 1
Link to post

 

 

On all new guns you need to clean inside of the barrel before putting any pellets down it

 

Yeh, but I'm not sure what that has to do with 2 faulty guns in a row?

The first one is faulty without a doubt but if you haven't cleaned the barrel with a pull through , you will still have the factory grease inside the barrel causing it to shoot like a shotgun

The second one was taken apart & an engineering problem found. Both gun barrels were cleaned by me.

 

I'm sure the 3rd gun should be fine ;-)

Link to post

Did you buy from here: https://www.db-schietsport.nl/nl/lucht-wapens/weihrauch/

 

I believe this is run by an Englishman.

 

They also dispatch to the UK if anyone here fancies one.

 

The continental shops are cheaper than ours, even including delivery. Though not sure about returns.

 

Yes. He's seems a really sound bloke tbh. A good price on the 97k, but AA's a lot more expensive than uk.

Link to post

I recently decided to get an air rifle for the first time since my teens. I wanted to get either the pro-sport or a tx, but decided I couldn't really justify 800 to 1000 euros or more getting the full kit, gun, scope etc etc so plumped for the 97k instead. It wouldn't be used that much anyway.

Well I've just had 2 faulty bran new guns in a row. First one had a broken spring, so took that back & exchanged. I then couldn't get the new one shooting right, so they sent me a new scope.......still no good! At this point Im starting to really doubt myself..haha, but took it back & have just been informed today that that one had some engineering issue......so we are on gun 3 now!

Is this normal now with weihrauch or have I just been incredibly unlucky?

Incredibly unlucky is my two pence.

  • Like 1
Link to post

HW quality control is crap nowadays,the last 99s I tuned had so many bits of turnings embedded in the piston seal (brand new rifle) I scrapped it and replaced it with a Vortek one (superb) and the amount of swarf that came out when I de greased it all was quite staggering, most of the new HWs sound like a car crash(springers obviously) before de burring and tuning, its not on from a manufacturer that prides themselves on quality.

  • Like 2
Link to post

HW quality control is crap nowadays,the last 99s I tuned had so many bits of turnings embedded in the piston seal (brand new rifle) I scrapped it and replaced it with a Vortek one (superb) and the amount of swarf that came out when I de greased it all was quite staggering, most of the new HWs sound like a car crash(springers obviously) before de burring and tuning, its not on from a manufacturer that prides themselves on quality.

I'd naively assumed you couldn't go far wrong with weihrauch. If the Walther had felt better for me, I'd of took that tbh. I had read a couple of your posts on them.

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...