Jump to content

19powell90

Members
 View Profile  See their activity

  • Content Count

    790

  • Joined

  • Last visited

 Content Type 

Everything posted by 19powell90

  1. 19powell90
    hey mate i know other people have done it but i couldnt find a full picture guide on how to do it so i thought i would give it a go. any chance you could put up some pics and reviews of the different types you have done atb scott
  2. 19powell90
    hi mate alot of people seem to use sony handycams as they are good quality and have a NV mode. and very large HDD's. also make sure you get a camera with a threaded part around the lens so you can attach it to you scope easier. i have just bought a sony handycam sr33e so will be posting how i attach it to my scope atb scott
  3. 19powell90
    Hey guys I have recently bought a sony handycam with night shot and want to improve the IR. What is the best IR to buy? I have seen the chinese torches/bulbs on ebay - are these any good?? I have a 300 lumen ultrafire - can i get an IR filter to fit on the front?? Any advice is good Thanks Atb Scott
  4. 19powell90
    A piccy of my beautiful S410 crowned with a hawke 4-16x50 AO IR scope and modded AA silencer And a beautiful headshot ( just like all my kills ) on a squizzer!!
  5. 19powell90
    Welcome to the forum mate! any advice you need just ask as the lads on here are great and really helpful! atb scott
  6. 19powell90
    yes iv heard nothing but good things about them, going to get the half version if i can,so not to make the s400 any longer than it is,as im a short arse and when its on my back looks like a fricking antena pokeing out. cheers mate Andy will video the difference between normal and modded this wkd. do they do a shorter twink?? atb scott
  7. 19powell90
    Type ' cree zoom uk ' these torch are f*****g bright!!!! And can be focused down to a spot beam !! All in for £20 BARGAIN!!!!! Atb Scott
  8. 19powell90
    imediate notification on what? i dot understand. i cant see a thumb either!!! ahhhhh! atb scott
  9. 19powell90
    i know mate lol. just need to get some washers and will be sweet as. see ya soon atb scotty p
  10. 19powell90
    good info matey hoping to send my s410 off to him when i get some moneys. atb scott
  11. 19powell90
    they dont sell them in the shops you can only get them online. EBAY IS THE WAY FORWARD atb scott
  12. 19powell90
    Then we need to go down to the pound shop and buy some haircurlers approximately the same size diameter as the springs. also while you are there you need to grab some insulating material. i used microfibre cleaning pads that are 16x22cm and just cut them down. then you need to lay out your silencer and materials cut the bits to size. the insulating material needs to be quite thick so it keeps the curlers central in the silencer the whole design is based on the HW silencer and will improve the silencer.
  13. 19powell90
    Right so now its time to change these parts. first off you need to take your metal washer down to a hardware store and find 2 that are the same external diameter size but have a smaller hole in the center preferably 8mm ( this is what is used in the HW silencer ). i have not got the metal washers yet but i will show you with nylon washers for illustration purposes. the center of the nylon washes arent 8mm either
  14. 19powell90
    Now heres the internals of the silencer basically its just two springs covered in scotch brite and seperated by a metal washer.
  15. 19powell90
    Once unscrewed you will be able to see the internals. just pull these out, they will come out realitively easy. if you struggle to get the spring out right at end, i used a pencil from the flat end and pushed the spring and surroundings out.
  16. 19powell90
    Hey all i have been doing alot of research of how to modify the Air Arms silencer and i cannot find a full guide on how to so i thought i woukd do one! so here we go. First of all remove the silencer from your rifle and preferably take out the grub screw AND REMEMBER WHERE YOU PUT IT!! then you want to unscrew the conical end of the silencer - this can be quite difficult just depends on how lucky you are, basically these end is loctited on, first i would try and take a good firm grip on it and screw it off. if that fails then you will have to heat up the conical ( where it meets th
  17. 19powell90
    go lamping mate! much better chance of rabbits. get one of these for lamping there mint: http://cgi.ebay.co.uk/ULTRAFIRE-TORCH-WF-501B-250-LUMENS-CREE-LAMPING-HUNTING-/260713899068?pt=UK_SportsLeisure_Camping_LightsLanternsTorches&hash=item3cb3c2643c atb scott
  18. 19powell90
    Hi lads im looking at getting a camera for scope cam shooting does anyone know what to look for? Cheaper the better really Atb Scott
  19. 19powell90
    The zero ranges i have been to are measured from the back of scope (eyepiece) atb scott
  20. 19powell90
    Ah cheers pal missed that, Not you fault bud being a bit blonde today. Many thanks pal. Karpman SORTED nice to help a fellow shooter! atb scott
  21. 19powell90
    pm coming cheers matey scott
  22. 19powell90
    hi mate the link i posted up are from a uk seller that takes 2-3 days to arrive and are they same units as the china ones. sorry if i didnt make it clear. atb scott
  23. 19powell90
    hi mate i myself own a ultrafire cree torch 300 lumens one thing is for sure is that they are fookin bright for the price and size. basically theres no point in buying them from china as they take a month to come so heres a link to an ebay shop that sells them: http://stores.ebay.co.uk/sporting-kent as for red leds - they dont work aswell as actual bulbs with a filter. also trying to put a red film on a white led wont work - ive tried. the 300 lumen ultrafire is powerful for most applications and can spot rabbits clearly out to 100m easy!! but one downside is that it has nice
  24. 19powell90
    fool ....... how you come to that decision then ? i think he means you have to watch out when buying second hand. scott
  25. 19powell90
×
×
  • Create New...