I think you will find Davy means that exceeding the power it was `set up for ` will throw the accuracy out of the window . Powering up or down is not as simple as turning a screw , like some think . Its getting the balance right and making the rifle run as well as it can .
Why always the arguments Mike , WTF is your problem ?
I dont give a shit what the PDF says , ive had more of these apart than ive had hot dinners and there IS a particle filter in the end .
Now i dont really care , but the info given here WILL ruin somebodys air rifle ..........
Thats a sure fire way to get water / moisture unside the rifle .
I would`nt do that , thats for sure .
No?. then get yourself off down to NSP Engineering the makers of Air Arms and see how the professionals do it. no doubt you would use thin oil or parafin and hope it wouldnt explode on its next fill.
NO , ide just change all the seals , You can get a full set of genuine AA seals for under a tenner .
Why would you use Dry Air , and then chance moisture in the cylinder .
Cant even be arsed to answer to this stupid post . Mate do yourself a favour and DONT put it in the water , as the filters on the filler WILL get wet , and moisture inside a PCP is something you dont want .
Always lube mine .
I wash them in luke warm water with a drop of washing up luqid in . I gently `swirl` them around untill they are clean . Once they have been washed , i run the cold tap on them to wash away the soap suds . I pour the water out and empty them onto a tea towel , gently rolling them around to take away access water . I give them a rol in a kitchen towel and pour onto a paper plate , to sit by the boiler and dry over night . Once im happy that their dry and clean , i have a plastic bag which i give about 5 `sprays` of pellet lube . I carefully empty the pellets into the ba
im looking to get a new puter . Question is what . I pad ,or laptop .
If i get an I pad , i`ll get a dock for tunes etc , but if i get a laptop , i may still get an i pod for tunes , plus a dock .
So which do you have and why ?