mC HULL
-
Content Count
16,282 -
Joined
-
Last visited
-
Days Won
25
Content Type
Profiles
Forums
Gallery
Articles
Gun Dealer's and Fieldsports Shop's
Reloading Room
Blogs
Calendar
Store
Classifieds
Everything posted by mC HULL
-
i love reading the thl boxing thread lol
-
plenty of saluki in it hope it turns out a cracker for you
-
hopefully get the engine together this week if i get an hour i’ll bang a few pics up
-
ye mate it can be hard work getting parts the bottom end wasn’t bad i was lucky 60quid crank would need rebuilding but if the bearings good it’s served it’s purpose
-
the kawasaki stuff is normally easy to get old ktm i’ve just had to buy a second hand bottom end for a roller bearing can’t get it i just hope it’s ok when a split the cases lol piston had to be forged no sells a cast
-
you will have tighter clearances with cast mate forged expand more so you will have more chance of damage piston slap when the engine is cold even if the owner is sensible and warms the engine before giving it any hammer i’d still choose cast my self mate but sometimes all you can get is forged just warm them up is all you can do
-
the flywheel side seal is easy to spray easy start or carb cleaner etc around it see if it changes the note mate i always stick with cast pistons were i can
-
salt fish fritters are belting
-
keep us updated mate
-
they worse then any kid mate ain’t they i wouldn’t have one in the house for a million quid come in think you’ve been ransacked dog crate door bent off door to kitchen in half like a barn door because you have a cheap lock on it fridge and bin raided the c**t asleep on your bed like it’s done nothing ye f**k that lol
-
there’s chinese places here near the uni aswell couldn’t speak to you can’t read the menu come out with bat and dog cantonese style lol
-
that’s handy to have mate splatter can be caused by all sorts normally power wire feed or arc is to long your looking for nice even penetration you do push the weld on thick material mate but thin stuff you pull it let’s you control the heat then real thin you will have to stitch weld at times on off power then keep moving about until it’s all filled in you don’t need a pedal mate you can control it with the torch most inverter tigs are2t and 4t now so you can pulse it or have it full power for big runs on thicker stuff and material get one bought mate it can get addictive
-
love cheese just pisses you off when you grab it out the fridge and it’s got a big chunk with teeth marks in it off one of the little b……..s lol
-
can be rough that pigeon shit id mask up aswell lol
-
changed scenery a few times mate it’s the best way i always like fabricating bits up
-
ye mate like you say nothing is good try to limit it as best you can don’t you
-
because all they do is lie to us lol
-
i don’t think rock wool glass wool is to bad tomo i know lads for decades rip sawing it all day everyday no masks on some 60 now still fine
-
can’t beat the eggshell i don’t think gl much better then glosses
-
i doubt a lot use any masks mate hot sweaty and things in the way you have to remember some gases are heavier then air so in confined spaces you need to vent accordingly
-
what did you work on steve
-
ive got a few bits to do in this next month a few tanks and air filter housings on some crossers out aluminium i’ll put a few bits up when i’m doing it won’t need x raying it isn’t pass after pass on an inch thick tube but tig welding aluminium isn’t welding aye lol
-
think it’s how i’ve got the phone mate
-
what is proper welding ?
-
ye mate easy on any metal a few mm thick the rod has a flux that keeps any contaminates out the weld easy to learn really loads be on youtube when he gets as good as borr his slag will peel itself lol
