Jump to content

davyt63

Donator
  • Content Count

    8,326
  • Joined

  • Last visited

  • Days Won

    9

Everything posted by davyt63

  1. Thats about 15 miles from me! :thumbs: only a 232 bar cylinder though Darryl hi darryl they do a 300 bar as well ,me tinks!! regards davy
  2. davyt63

    EBAY

    hi steve here ya go buddy http://www.jsramsbottom.com/products/chronographs/cb625-combro-cb625-air-rifle-chronograph-mk-iv-model.html hope this helps regards davy
  3. hi si its looking good buddy regards davy
  4. hi lads i use to have a calculation chart in my favorites,but its not there no more .so i have found a few more below. http://www.airhog.com/tank.htm http://www.airgunsofarizona.com/Tanks/FillCalc.html http://www.airgunexpo.com/calc/calc_fill.cfm? hope this helps some one else may have a better one regards davy
  5. hi buddy thanks!! and it is against the forum rules,to be talking about how to adjust the power on an air rifle regards davy
  6. hi lads me thinks you should have a look at this link http://www.deepblueshooting.com//department/air-gun-charging/product/3ltr-232-bar-charging-kit/429397 a very good price,i think regards davy
  7. Hi Pete long time no here. How you doing buddy. You still in the same location? regards Davy
  8. hi buddy if you are going rabbit shooting, then i would say don't bother,just yet see how you get on!! and i will tell you the reason why? whether you hit a rabbit with a PCP or a springer,they still run off.not from the noise of the twang!! but the noise of the THWACK!!!!!!!!!!! right in the Bunny's skull. this is the sound that makes em run off,i used to shoot a AATX200HC .22 with no silencer.and always bagged Bunny's,it also depends on how long you want to wait after ,you have just scared them all away but as Steve said some of the noise is right by ya ear the rifle's
  9. hi Steve there is no need to try and do the poi change when your low on air,as i feel this is pointless you never go out hunting/target shooting with 80bar in your rifle and there is so much change that it is hardly worth it.i also found this out last year at AAOC,and after put some research in as you do ,but too frustrating its just a waste of time,but if your up for doing a post on it.then be my guest,may be it was me. not enough patience. PS. use 15mm & 40mm targets regards davy
  10. hi tony im sure he will turn up ,now he knows his name is up!!!!!!!!!!!!!!! regards davy
  11. and a couple more 1. Davyt63 2. Lighthunter 3. hunter1989 4. rossi_j 5. Andyfr1968 6. shay (venomviper) 7. Mikeyblue 8. Si and Laura 9. Dom (redeye) 10.festa and shannon 11.Nathan R 12.Rossy08 13.Basejumper 14.Mark vining 15.Owen vinnig 16.Darryl ( marksman ) 17.Joey ( garfield ) 18.Chris ( reggaman ) 19.dave(hunter1989) brother 21.phill(hunter1989)step dad 22.Simon ( Pianoman ) 23.Mick 2510 24.ANDY&ARCHIE 25.Millsy44 (peter) 26.AndyZ 27.Sam (Ron Weasley) 28.Phantom 29.Matt Hooks 30.kingoftoosh 31.gurtwurz 32.Harvey1972 33.Fred 34.Scuba1 35.paulx
  12. hi Kev here ya go buddy Twink & adapter its a steel adapter NOT!! ally.and is approx 50mm and this is what it looks like on the Twink! once fitted its 30mm long see how perfectly its a aligned with the twink this then slides over the barrel,and you tighten it with the grub screw regards davy
  13. Hi Kev no problem buddy it Will look good with a twink. I also have a 15mm adapter which will fit the barrel and twink regards Davy
  14. hi buddy check what volt battery you need,i have experienced that a 3.7 volt will shut my lamp off after a while,but when i use 3.volt its ok.also if it keeps going out it may be your batteries need recharging ,or replacing.this also happens with mine,its the lamps way of telling you. you have to replace the battery's,as they have a cut off built in to them hope this helps regards davy
  15. hi buddy yes its pre AT thanks buddy but would advise you remove the above statement,as i have done can i have the serial number please!! regards davy
  16. hi darren SHAME!!! on you!! for ditching your AATX200HC just out of interest what did you let it go for? regards davy
  17. hi steve is the AA Anti Tamper or pre Anti Tamper?, if its pre AT then you will be able to take it off and change the seal,but before you do this make sure all the air is out of the cylinder complete!!! if its Anti Tamper then you will have to take it to a gunsmith or you can drill out the blank your self,and take out the hex screw and chage the seal hope this helps regards davy
  18. hi jasper thats why i always do my home work if buying a seconhand rifle have you spoke to Adi http://www.amcustomgunsmiths.com/index.html he may be able to help you out buddy,just mention this forum hope you get it sorted buddy regards davy
  19. thanks Si just got to sell my s200 now, Tony hi tony is in the for sale section? if so how much is it going for? regards PS its ok i found it!!! & price! davy
  20. hi buddy give Adi Waugh a ring here! at http://www.amcustomgunsmiths.com/index.html Contact Contact details telephone/fax: 01623 861308 mobile: 07749 993 196 email: amcustomgunsmiths@hotmail.co.uk Opening times Closed Monday Tuesday Open PM-PM Wednesday Thursday Friday Open 9am-4pm Saturday Sunday he will be able to help you buddy,and he is not far from you,just mention this forum and he will look after you. PS.check out the falcon accuracy pellets he has there! i get good results in my AAS410K regards davy
  21. hi every one nice to see the list growing lads i spoke to the owner friday 17th of http://www.old-downs-pursuits.co.uk/air-rifle-shooting-hft-ft and he is happy to hold the meet there!! just need to finalise a few things would just like to add,if any one is bringing freinds/relatives.can you ask them to register on here! and start mixing with the airgun regulars,so we all know one another when we meet up it only has to be a short introduction! we will learn a bit about them. and they can learn from us!! regards 1. Davyt63 2. Lighthunter 3. hunter1989 4. rossi
  22. hi lads its a cracking rifle "in the right hands" marksman shoots one and has no problem with his,he may be able to give you some tips if ya PM him he will let ya know enjoy lads regards davy
  23. hi buddy you wont go wrong with an Air Arms you know the old saying ,"if its not broke,why change it!" here are some reviews,hope its the right model? http://www.reviewcentre.com/reviews180146.html Air Arms http://www.reviewcentre.com/reviews1315.html hope this helps regards davy
×
×
  • Create New...