mC HULL 15,741 Posted 4 hours ago Report Share Posted 4 hours ago 7 minutes ago, NEWKID said: I don't do slate roofing, so wouldn't comment much on it... Over the past 30 years I've pretty much worked on most types of commercial and industrial builds from the ground up, was asked by the holding company of KFC to redesign their existing building envelope to improve the air tightness, this was rolled out nationwide, we built them from Penzance to Glasgow, had to sit countless meeting with architects and other contractors to ensure our details were rolled out, I believe this became the details for all KFC drive through builds after... we had a large supermarket contract, steel, roofing and cladding on Tescos nationwide, loads of roofing and cladding types, single ply flat roof membrane, composure, zinc, fibre cement, aluminium built up systems,...rain screen systems... we had an offshore from our main business that dealt solely in bespoke steel work, fancy staircases, balustrades, balcony structures etc... we offer a full build package.... from a green field site to completion... I've worked with 100s of architects and engineers... employed 100s of people, loads of different trades... we weren't huge but had 35 direct employed and around 60 tubby gangs nationwide at one point.... I bought a massive renovation project with 19 acres of land, at the same time renovated 2 other houses for rental, alongside 3 cottages for air bnb... the main house is nearly 6 years of work so far, using trades but loads by myself.... You may have packed a few slates in your time mate... it honestly means f**k all to me, there's lads on here that I know who I ask advice from constantly on building projects, one lad on here is probably the best welder I've seen, absolute quality workmanship... I won't go on a back and forth with you about building a garden shed mate, the job we've just finished was a 2 year project, ran alongside 3 sports halls, a school project abd a tennis centre, plus a load of smaller jobs..and we've scaled down to the minimum as I don't need the aggro of know it all's who in truth know f**k all.... All I read was kfc lol your my hero ask @green lurchers So we are talking about a roof on a dwelling as dc said So what your saying is on dwellings some have slate and a dozen other things I could go to any anywere and whack. it out You couldn't But you know more then me about roofing ? I understand insulation mate or a descent bit All the other stuff sounds like your intelligent and are killing it mate I take my hat off to.you and like I said any time I've asked things your always spot on. There's No flys on you 1 Quote Link to post Share on other sites
mC HULL 15,741 Posted 4 hours ago Report Share Posted 4 hours ago Regarding dwelling lol who knows more about roofing stiff , ? Quote Link to post Share on other sites
mC HULL 15,741 Posted 4 hours ago Report Share Posted 4 hours ago He's gone lol lol Quote Link to post Share on other sites
mC HULL 15,741 Posted 4 hours ago Report Share Posted 4 hours ago So newkid your a roofer but I needed all new drains in can you do that? Quote Link to post Share on other sites
mC HULL 15,741 Posted 4 hours ago Report Share Posted 4 hours ago What about fit a kitchen ? Quote Link to post Share on other sites
mC HULL 15,741 Posted 4 hours ago Report Share Posted 4 hours ago What about fit a door and frame Quote Link to post Share on other sites
Daniel cain 48,529 Posted 4 hours ago Report Share Posted 4 hours ago 2 1 Quote Link to post Share on other sites
NEWKID 28,489 Posted 4 hours ago Report Share Posted 4 hours ago 7 minutes ago, mC HULL said: All I read was kfc lol your my hero ask @green lurchers So we are talking about a roof on a dwelling as dc said So what your saying is on dwellings some have slate and a dozen other things I could go to any anywere and whack. it out You couldn't But you know more then me about roofing ? I understand insulation mate or a descent bit All the other stuff sounds like your intelligent and are killing it mate I take my hat off to.you and like I said any time I've asked things your always spot on. There's No flys on you Going back to the start. . Wilf asked about metal sheet roofing, not slate, I gave some advice on what he asked and what I know about.. I've got his email and will send him some details and hopefully a bit of help on buying the stuff if I can.. My grandad was a roofer, pour and roll flat roofing, traditional felt roofing, my dad and both uncles are/were roofers the same as my grandad.. my old man is 74 and was on a roof 3 months ago as he can't say no lol... my grandad was at it into his 70s.... I never went down that road though, was always into the bigger commercial/industrial builds... I doubt i know as much as you about slating and tiling, I've done a bit but wasn't my mainstay.. I've been around the building game from before I left school, on roofs from 12 or so in summer holidays, weekends etc... I'm honesty not trying to prove how much or little I know, it matters not... I think Wilf will get the info help he needs from me though... 2 Quote Link to post Share on other sites
THE STIFFMEISTER 16,934 Posted 4 hours ago Report Share Posted 4 hours ago 5 minutes ago, Daniel cain said: I’m glad it’s not just me who sees this 1 2 Quote Link to post Share on other sites
NEWKID 28,489 Posted 4 hours ago Report Share Posted 4 hours ago 6 minutes ago, mC HULL said: So newkid your a roofer but I needed all new drains in can you do that? 6 minutes ago, mC HULL said: What about fit a kitchen ? 5 minutes ago, mC HULL said: What about fit a door and frame Building is my job mate, I build things from the ground up...lots and lots of things... I.also renovated houses for rental or sale, I've f****d about like this for 30 years...I can turn my hand to mist things, but I have chippies, sparks, plumbers, brickies etc who are better than me at their trades...so I get them to do it... my core work is steelwork and cladding systems, big units, commercial/industrial...that's my trade... but I'm happy to turn my hand to most things when I'm in the mood lol 2 Quote Link to post Share on other sites
mC HULL 15,741 Posted 4 hours ago Report Share Posted 4 hours ago 5 minutes ago, NEWKID said: Going back to the start. . Wilf asked about metal sheet roofing, not slate, I gave some advice on what he asked and what I know about.. I've got his email and will send him some details and hopefully a bit of help on buying the stuff if I can.. My grandad was a roofer, pour and roll flat roofing, traditional felt roofing, my dad and both uncles are/were roofers the same as my grandad.. my old man is 74 and was on a roof 3 months ago as he can't say no lol... my grandad was at it into his 70s.... I never went down that road though, was always into the bigger commercial/industrial builds... I doubt i know as much as you about slating and tiling, I've done a bit but wasn't my mainstay.. I've been around the building game from before I left school, on roofs from 12 or so in summer holidays, weekends etc... I'm honesty not trying to prove how much or little I know, it matters not... I think Wilf will get the info help he needs from me though... No mate I was on with you about it why pitched etc I was saying could be cheaper then the cranks start leave it to ,,, you know nothing.... Quote Link to post Share on other sites
mC HULL 15,741 Posted 4 hours ago Report Share Posted 4 hours ago 1 minute ago, NEWKID said: Building is my job mate, I build things from the ground up...lots and lots of things... I.also renovated houses for rental or sale, I've f****d about like this for 30 years...I can turn my hand to mist things, but I have chippies, sparks, plumbers, brickies etc who are better than me at their trades...so I get them to do it... my core work is steelwork and cladding systems, big units, commercial/industrial...that's my trade... but I'm happy to turn my hand to most things when I'm in the mood lol8 Cracking post I could say liar I don't believe you But you can turn your hand to.most things and if your half sensible learn quick and ask what you dont know look into it the information is there Like you say there will be better at it faster at it etc but it's achievable easily 90mpercent a things Quote Link to post Share on other sites
mC HULL 15,741 Posted 4 hours ago Report Share Posted 4 hours ago 8 minutes ago, THE STIFFMEISTER said: I’m glad it’s not just me who sees this What ? Like I said same with insulation it's not rocket science once shown mate Quote Link to post Share on other sites
mC HULL 15,741 Posted 4 hours ago Report Share Posted 4 hours ago 12 minutes ago, THE STIFFMEISTER said: I’m glad it’s not just me who sees this Show us your toolbox stiff tools home and work let's see what you get up to Quote Link to post Share on other sites
NEWKID 28,489 Posted 4 hours ago Report Share Posted 4 hours ago 4 minutes ago, mC HULL said: Show us your toolbox stiff tools home and work let's see what you get up to Ffs it's gone from let's see your calfs to...let's see your toolbox...gay as f**k!! Lol 5 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.