BBQ Smoker

[mC HULL 15,585]

28 minutes ago, FLATTOP said:

Yeh it’s the same sort of thing if I remember when Kanny bought his it was a similar size to that but a pit boss, all it is is an electric auger feeding flavoured pellets into a hot element that’s is thermostat controlled, reasonable price £500.

that’s what i was after mate thanks it seems reasonable priced i’ll have. go i think

[Bangersanmash 4,910]

6 minutes ago, mC HULL said:

that’s what i was after mate thanks it seems reasonable priced i’ll have. go i think

Get yourself and old portfolio cabinet mate. Cut the bottom of the draws out mesh them up except the bottom one. Leave that for pellets or wood that you go collect.  Then insert chimney at the back at the top. f**k paying for sumat you can make Mc. Plus you can put rods through to hang stuff on inside the draws. 

Edited May 18 by Bangersanmash

[mC HULL 15,585]

Just now, Bangersanmash said:

Get yourself and old portfolio cabinet mate. Cut the bottom of the draws out mess them up except the bottom one. Leave that for pellets or wood that you go collect.  Then insert chimney at the back at the top. f**k paying for sumat you can make Mc. 

these do it for you mate  the temp use the right amount a pellets takes all. the hassle out i smoke bits on the bbq but it can be tricky and use a lot a peelets 

if your in garden a good bit and will use it there worth a punt i recon

[Borr 7,621]

At 182f I'll probably wrap it and rest when it hits 195f...

 

[Bangersanmash 4,910]

22 minutes ago, mC HULL said:

these do it for you mate  the temp use the right amount a pellets takes all. the hassle out i smoke bits on the bbq but it can be tricky and use a lot a peelets 

if your in garden a good bit and will use it there worth a punt i recon

Can't beat cost affective cooking. Bollocks lining some other c**ts pocket when you can make your own just as good. Put a temp gauge at the front. Few vents to open up. Happy days. Bollocks paying 500 notes for sumat that can f**k up. All you need is shavings snowflake bedding. Slow burning. 

[Bangersanmash 4,910]

With them portfolio cabinets you can put full chickens in Mc in top draw.  jacket spuds on middle , with some vegetables too. Any meat. But seen them with full chickens.  Brillant bits of kit. 

[kanny 21,600]

1 hour ago, FLATTOP said:

Yeh it’s the same sort of thing if I remember when Kanny bought his it was a similar size to that but a pit boss, all it is is an electric auger feeding flavoured pellets into a hot element that’s is thermostat controlled, reasonable price £500.

Mines bigger than yours mate! ...lol 

I got the pit boss navigator 1150, I was after the same as yours, I ordered it from bbq land but they fukt up , basically they were out of stock so they did me the navigator at the same price....anyway they all work with the same principle regardless of size or make,  great bits of kit, you can't go wrong...as you rightly mentioned they are a smoker first and foremost.

[FLATTOP 5,110]

9 minutes ago, kanny said:

Mines bigger than yours mate! ...lol 

I got the pit boss navigator 1150, I was after the same as yours, I ordered it from bbq land but they fukt up , basically they were out of stock so they did me the navigator at the same price....anyway they all work with the same principle regardless of size or make,  great bits of kit, you can't go wrong...as you rightly mentioned they are a smoker first and foremost.

Get you lol nice bit of kit 

[kanny 21,600]

My ribs done 4 hours in the smoke,   just wrapped em for a hour...I call it the 4/1  method lol

[Borr 7,621]

26 minutes ago, kanny said:

Mines bigger than yours mate! ...lol 

I got the pit boss navigator 1150, I was after the same as yours, I ordered it from bbq land but they fukt up , basically they were out of stock so they did me the navigator at the same price....anyway they all work with the same principle regardless of size or make,  great bits of kit, you can't go wrong...as you rightly mentioned they are a smoker first and foremost.

I might go for one of these when my egg dies, but tbh I can't imagine not using charcoal ....I quite fancy making my own smoker I could buy a tank/vessel and cut and fabricate it easy enough....

[FLATTOP 5,110]

1 hour ago, mC HULL said:

these do it for you mate  the temp use the right amount a pellets takes all. the hassle out i smoke bits on the bbq but it can be tricky and use a lot a peelets 

if your in garden a good bit and will use it there worth a punt i recon

If you do get one shop around for your pellets the price differences are big pit boss and treager will probably be your most expensive I bought a job lot out of tescos that were on offer hardly any difference to be fair. 

[kanny 21,600]

7 minutes ago, Borr said:

I might go for one of these when my egg dies, but tbh I can't imagine not using charcoal ....I quite fancy making my own smoker I could buy a tank/vessel and cut and fabricate it easy enough....

I'd like a ceramic egg when mine dies lol ...yeah if you are handy with metal then it should be fairly straightforward to build a wood smoker I'd imagine,  thicker the gauge, better the heat control

[Borr 7,621]

3 minutes ago, kanny said:

I'd like a ceramic egg when mine dies lol ...yeah if you are handy with metal then it should be fairly straightforward to build a wood smoker I'd imagine,  thicker the gauge, better the heat control

Yep seen quite a lot, reckon I could get firebox laser cut and maybe make it so it could sit in an outdoor kitchen oh the dreams I have lol...

[kanny 21,600]

14 minutes ago, FLATTOP said:

If you do get one shop around for your pellets the price differences are big pit boss and treager will probably be your most expensive I bought a job lot out of tescos that were on offer hardly any difference to be fair. 

I often get the treager pellets simply because they are more conveniently available to me but I do rate the pitboss pellets better,  seem to get a deeper smoke flavour from them imo..local garden centre has just stocked the pitboss range so hopefully I've got a local supply now.

[FLATTOP 5,110]

I reckon my son would be up for selling this the spec on it is unreal reverse baffles chimney able to go on either side and the steel is very thick bespoke made by a company in Yorkshire Meat City Smokers I think they were called weighs a bloody ton, I just helped him move to Herefordshire and it was emotional getting it on the lorry lol.