Jump to content

Victor 120-2 Is Illegal.. Update On Use.


Recommended Posts

hi folks

 

update.. i just received a email from natural england changing there mind on the 120-2 and all similar DOUBLE SPRINGED which otherwise would be classed as clones if the 120-2 was legal.

 

the 120-2 is now classed as illegal so im pissed right off.. traps ive had for years now out of service.. i think they need to amend as the 120-2 is a equivalent with just a extra spring so its better in strength.. but here's the email and im waiting on a call from NE so i will update more asap when i know more.. but this email says it all.

 

the email is here its a exact copy and paste minus my name.

 

Further to my email of 11 June 2015, I have now reconsidered the position with regard to the Victor Conibear 120-2.

Under Sec 2 of the Spring Traps Approval (England) Order 2012, any spring trap which is equivalent in all relevant respects to a spring trap of a type and make specified in any entry in Column 1 of the Schedule, is approved. A spring trap is equivalent in all relevant respects to a spring trap of a type and make specified in the Schedule if it corresponds to the spring trap so specified in construction, in materials, in impact force or momentum, and in all other respects which are relevant to its effect or manner of operation as a trap.

The Victor Conibear 120-2 consists of 2 springs whereas the BMI Magnum 116consists of only one. The construction of the Victor Conibear 120-2 is therefore at variance to that of the BMI Magnum 116, which means it cannot be regarded as ‘equivalent in all relevant respects.

I hope this helps

Kind regards

 

 

Link to post

  • Replies 31
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

And only in England

Now, what needs to be answered is; who put the 120-2 on the 'clone' list by naming them specifically and, WHY?

look at this.. duke 116 on the stao... but for greys no mention of mink and its a 116.. more confusion.   http://www.legislation.gov.uk/uksi/2015/1427/made

Posted Images

But the victor 110 would still be legal, as would the bellisle, bridge and duke 110's under the clone ruling. :victory:

Hmmmm! Wonder are all these traps as powerful as the Magnum 110? I mean, the cheap Fenn types are seen as illegal mainly due to inferior spring power, so what about Bodygrip types?

 

Another thing! How easy, or hard would it be to remove one of the Victor 120-2 springs, for those of you that already have some?

Link to post

But the victor 110 would still be legal, as would the bellisle, bridge and duke 110's under the clone ruling. :victory:

yes the only one i would check is the belise due to slight difference in jaw shape. they seem to be wanting exacts any visual difference is a possible no no...the bureaucracy in trapping and snaring is not helping im not happy with all these grey areas. i myself would say yes to belise but due to slight differences i wouldnt use em with risk of someone pointing out its not a bmi bodygrip or a exact clone.. anyone who uses dukes bmi ect would know straight away the difference with belise if they came across one.

Link to post

 

But the victor 110 would still be legal, as would the bellisle, bridge and duke 110's under the clone ruling. :victory:

Hmmmm! Wonder are all these traps as powerful as the Magnum 110? I mean, the cheap Fenn types are seen as illegal mainly due to inferior spring power, so what about Bodygrip types?

 

Another thing! How easy, or hard would it be to remove one of the Victor 120-2 springs, for those of you that already have some?

 

removal of one spring would do it as long as the other spring was 116 strength not 110.. for mink in uk. so its good enough for ireland to remove one spring here im doubtful as it would just be a 110 power not 116 power.

Link to post

but

 

 

 

But the victor 110 would still be legal, as would the bellisle, bridge and duke 110's under the clone ruling. :victory:


Hmmmm! Wonder are all these traps as powerful as the Magnum 110? I mean, the cheap Fenn types are seen as illegal mainly due to inferior spring power, so what about Bodygrip types?

Another thing! How easy, or hard would it be to remove one of the Victor 120-2 springs, for those of you that already have some?

 

removal of one spring would do it as long as the other spring was 116 strength not 110.. for mink in uk. so its good enough for ireland to remove one spring here im doubtful as it would just be a 110 power not 116 power.

 

but yes removal would be ok if just wanting 110's and 110 power.

Link to post

 

But the victor 110 would still be legal, as would the bellisle, bridge and duke 110's under the clone ruling. :victory:

yes the only one i would check is the belise due to slight difference in jaw shape. they seem to be wanting exacts any visual difference is a possible no no...the bureaucracy in trapping and snaring is not helping im not happy with all these grey areas. i myself would say yes to belise but due to slight differences i wouldnt use em with risk of someone pointing out its not a bmi bodygrip or a exact clone.. anyone who uses dukes bmi ect would know straight away the difference with belise if they came across one.

 

But would the slight difference in shape have any effect on it not being a clone? The jaws actually mesh together a little tighter on a belisle than on a BMI, the trigger has a slight different shape, but the jaw size and spring strength is very similar to the BMI,.....whether this is a clone or not is clearly a grey area then......my take is that it is a clone.

Link to post

jd i feel the same as you really but i think with the slight differences i would be careful of meeting some smart alec on a problem set.. the extra spring i would have seen as a improvement of strength but it didnt matter it was different to the 116. its certainly in a grey area for these slight differences concerning belise even if there done for the better, i personally dont own any belise but it would be good to get one sent in for a definite confirmation.

Link to post

Reading again, it is reasonable to assume that the slightly curved corners of the Belisle, when compared to the BMI, would not affect it at all. The clone wording uses the word 'relevant', and IMO it is a reasonable stance to say that the slight differences are not relevant to alter the performance of the trap to the detriment of the target species. I will take a couple of piccys for those who have not compared the two...

Link to post

i myself would say yes but i reckon some ejjit might try and say the jaw difference matters no matter if its for or against a better trap. the bmi and bridger have clearly similar jaw dimensions. the belise has different angles. m shape is magnum thats what they will see. but im hoping your right jd and my opinion is wrong.. im playing the devils advocate, some visit at a set gets heated with some official or something, they could be picky if you get what i mean. let the courts decide they say is the usual thing most get in such arguements. im gonna sit back for a bit and see what others think.

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Peter Shorrock
      I have been doing a minimum amount of work around the pheasant shoot pens over the past few weeks allowing me to get used to the surroundings and know the pen alot better.
      In the process of building shelters for the arrival of some new pheasant chicks I stumbled upon 2 holes in the ground (like mole tunnels). 1 is just in a little dip on the ground and one is going into the floor next to a rock. These both are a good mile away from eachother. I dont know weather they are Stoats, Rats or Weasels but they need dealing with. I was wondering weather to smoke the holes out but as i can only find one the pest may escape. One of the game keepers suggested putting Fenn Traps outside the entrance BUT i dont know weather the nests are active and as i only know where one entrance on both nests are i am stumpt. The chicks are due soon and i need to sort this out. ANY SUGGESTIONS TO MY SITUATION WILL BE TAKEN MOST GRATEFULLY. Thanks.
      peter
    • By MR TEA POT
      Saturday morning seen me and BODGERBEAR heading up to WOODGAS, for me to brush up on my snaring skills and BODGERBEAR to start learning PLUS TO PICK UP A BOOK FROM ROB SHARP THAT I HAVE BEEN WAITING FOR NOW FOR TWO YEARS .
      I could tell Woodga was pleased to see me because as soon as I pulled up to his road he ran down the street, straight into his house and locked the door .
      It was a mixed weekend with a bit of trapping/snaring/shooting/lamping/dry stone walling.
      Here are a few pics of the weekend
       

       

       
      Woodgas got a few more pics of the snaring and trapping.
       
      We then decded to do a bit of drystone walling,to show BB how it goes
       
      Woodgas dogs marking,i think there is one in here

       

       
      Yes there was
       

       

       
      BB with his first rabbit out the walls
       

       
      Caught a few rabbits out the walls plus shot a few the terriers put out the rough,so back to woodgas as we was off lamping which didnt goto plan,ill let woodga say why if he wants to.
       
      Just before i left i went shopping ...........in woodgas shed
       


       
      Got meself a few fence snares,a few pegs snares and bodygripps
       
      So big thank you to woodga as always a true gent,thanks again
       
      He even cleaned me car


×
×
  • Create New...