A Long Time Coming ...

[PIL 7]

A big up to Swindon's THL Fettler

 

First off davyt63 what a gent ! I had a problem with my AA S400 the seals needed changing and when pulling the bolt back it was a struggle to engage .I gave him a call and told him what the problems were and his reply was " bring it on over and we'll take a look " . To cut a long story short i had already bought a seal kit a couple of months previous and after finishing work work three hours later than expected i proceeded to make my way over to his humble abode .After an hours journey I finally arrive , I knock on the door (8.30) and get greeted with "about fecking time " then a cheeky smile .With in 5 mins we are in his "man cave " in the garden scope off half the bolts out then his lovely wife Joanne brings us out a brew , i must say he's got her well trained .With all the bolts out and most of the seals fitted there was a problem with getting the brass "thingy" off the inner end of the barrel (too much glue had been used) and no amount of hot air gun would release it . For those who don't know there's a very small seal inside the brass "thingy" . In the process of getting it off it got slightly damaged so like all good fettlers davy said "right feck off home i'll order another one in the morning" :laugh: . I got a txt in the morning as promised to say "another brass "thingy" has been sent out and would be with with me the following morning" .Anyhow by the time i had finished work the day after davy had fitted all the seals fitted the new brass "thingy" and even managed to sort the bolt problem out . Some how a pellet had managed to get into the bolt housing (god only knows) .

All in all a top fella :toast:

 

Part two of davy's kindness ,

 

I had a Crosman 766 pump up air rifle that needed new seals fitted . This riffle was going too a young lad that that wanted to get into the sport. The lads onlly 12 and even cocking a BSA Meteor was quit a struggle so i thought this would be ideal .I managed to get a replacement seal kit off flea-bay at an extortionate price but unless i lived in Canada it was that or nothing . To cut a very long story short davy very kindly got it all done and dusted for the young lad and without his help it would still be in bits at the back of the cupboard .

So to davy i say many thanks my friend :toast:

[davyt63 1,845]

 

 

About fecking time !!!!!! Lol

[zini 1,939]

Well in partner.

 

That's the way Davy T rolls.

 

A real gent that goes that extra mile to help out his friends.

 

Top man and a true friend of ours.

 

Si and Laura.

 

 

[gurtwurz 793]

i thought he'd been up the scrappy to weigh your lead in for you mate

[stealthy1 3,964]

The camaraderie on this section is second to none, good on you Davy

[bigmac 97kt 13,836]

He,s a top class lad and will help enyone that needs it all you have to do is ask well dun davy atvbmac

[PIL 7]

i thought he'd been up the scrappy to weigh your lead in for you mate

we met up Sunday before last and he had some pellets and said "try these " I kid you not I think he's starting to make his own they were worse than fecking bulldogs :laugh:

[gurtwurz 793]

thats cos the quality of the lead deteriorates after a couple of decades of lining a gutter mate, you lads wanna have a go at some modern buildings instead

[ftm 3,357]

well done davy for helping a lad out