Jump to content

robsharpe

Members
 View Profile  See their activity

  • Content Count

    851

  • Joined

  • Last visited

 Content Type 

Everything posted by robsharpe

  1. robsharpe
    thanks for the replies i am now more enlightened thanks
  2. robsharpe
    cheers sage for the reply will have look on the web, again its really the model i want to find out it says GMK as the importer may phone them or email the serial number see what i can find out,i did this with my remi 1100 they told me maufacture date too thanks rob
  3. robsharpe
    deker the only markings are franchi on the side plate with no model markings i did do some searching but to no avail cheers rob i will have look at barrell stamps too .
  4. robsharpe
    i had this gun over a year now and have shot quite well with it but i tried looking for another on the web to no avial , iwas told when i bought it ,it was a franchi diamond but not sure anyway the piont is anyone here know for sure the model, fixed choke, 28" barrels ,single trigger, the fore end as can be seen is strange taper
  5. robsharpe
    mr T can you please point out the runs i think i may be missing them , even i may have a chance there
  6. robsharpe
    too much time on your hands should stick to reading books , not lost your touch then you will get your book one day
  7. robsharpe
    some nice hounds there quality pics too
  8. robsharpe
    well today was the day i was going to have another go i stripped out the old pipe managed to get the females un done no problem, two turns and the pipe just disintegrated so they came away so rusted they fell to bits . i rings me mate to see if he will knock me a new pipe and fittings up and true to his word after a cuppa and some chat ten mins later a new one was done . a quick trip to halfords and a gallon of fluid am at it again lying in the snow mud and crap fixing the disco ( off on a tangent , read here am trying to keep the faith but i cant understand why i want to wriggle and shov
  9. robsharpe
    cheers stokie ,update i managed to get under this afternoon and where the pipe crosses the chassis rail on the drivers side next to the back wheel the pipe is split i kept topping up the MS and pumping a few times was by me self so had to keep jump out and looking ,so am shooting saturday so sunday will try get some brake pipe and flaring kit and crack on to do the job . i have heard to bleed them they are as stokie says a landy , this is what makes me lie in the snow on a friday afternoon seeking leeks only to find other jobs need doing too ahh well its a learning curve but as my wi
  10. robsharpe
    thanks hily if enough light will look this afternoon thanks for the tip on the drift problem
  11. robsharpe
    many thanks woz / sean for the replys, we still got lot of snow here so not easy to check pipe split /burst underneath but as soon as i can i will get under there and look properly , when i looked the resevoir was slighlty low but nothing major . another note woz on the hub the oil seals i changed the wheel bearings but found it hard to get the seal back in it says a drift to do it any pointers on that one also as the one i put in is now leaking thanks
  12. robsharpe
    cheers pav i looked under the pedals they look ok anyone else
  13. robsharpe
    the other day on the way home i hasd to brake quite hard twice after this the pedal went to the floor with little resistence am tempted to think master cylinder or pipe split due to the snow here not had proper chance to have look underneath , any pointers from the more knowlegdeable ,any help be good thanks rob
  14. robsharpe
    novice but well done, santa may bring you a book for xmas when i get me self sorted , good show old chap
  15. robsharpe
    yes deker you could be right but i had faith in him to take it clean
  16. robsharpe
    couple more
  17. robsharpe
    well santy be off on his sleigh before long, so we had a wander around the shoot am in and checked a few feeders the phesants are giving them some hammer with the weather so have to try keep springs clear we buy some cheaper wheat and has a lot of straw in so springs need to be checked i normally riddle but not done it last couple of times so have to cut the straw out of them ,anyway we managed to bag a squirrel with the trifle so thats one grey less to take me wheat heres a few pics of the last couple days merry xmas to all that read cheers rob
  18. robsharpe
    poor fellman is all i can say , the drink makes me do it , i am doing fine shooting a bit and setting a few wires now and again to keep me hand in , lots of snow here today about 4 inchs in co durham had a look down the wood to feed up a good day if cold hope you keeping well just let me know if you want some more wires , i cant have malicious gossip affecting my person all the best rob
  19. robsharpe
    thems the best snares i ever saw, rabbit catchers i bet , good to see the lil one carrying the gear start em young thats what i say to my lad ,good to see you getting out merry christmas
  20. robsharpe
    yeah your not wrong antg the reserve is not that bad either he has done a lot to it cheers rob
  21. robsharpe
    a mate has for sale his 110 defender its on evilbay at the minute worth a look if your in the market now no messers please http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=200414176236&ssPageName=STRK:MEBIDX:IT cheers rob
  22. robsharpe
    cracking day ben it will stay with you for a long time ,as for the woodcock imho the woodcock a truly sporting bird my favourite
  23. robsharpe
    same in co durham TR i know not that far from you but still a lot on the bushes here
  24. robsharpe
    now then neil if you windows xp go tot the microsft download site if you have gen xp , then search on there for power toys not its not what you think ,the download image resizer its free and simple to use all you do is right click on an image then select resize pick the size you want and select it ,it will leave your original image and another copy of the size you want easy peezy honest
  25. robsharpe
    sipe 32g number 6s good clean kills thump a bit but worth it ,also been using snipe 32g 5.5 s by proper cartridges seem a decent load cheers rob
×
×
  • Create New...