Jump to content

Buster321c

Members
 View Profile  See their activity

  • Content Count

    3,145

  • Joined

  • Last visited

  • Days Won

    3

 Content Type 

Everything posted by Buster321c

  1. Buster321c
    Theres an AA owners meet in a couple of weeks , at Furnace mill . Loads of lads there that would help
  2. Buster321c
    What do you mean field adjustable ?
  3. Buster321c
    Where are you ?
  4. Buster321c
    Oh my .......
  5. Buster321c
    Twat
  6. Buster321c
    Nice one Si ,
  7. Buster321c
    Quite excited if im honest . Got a few bits already . I was gifted a set of custom shroud baffles from a guy on here , and the reg work was also done by a bloke who`s a member . Im lucky to keep such good company . Thanks for all your help and support guys .
  8. Buster321c
    Ide swap it for a night with the girl in your AV Arch
  9. Buster321c
    All things come to those who wait
  10. Buster321c
    Got me new toy comming this week . Theoben MFR again , in .177 . I've had the barrel shortend to a 10 inch , and the shroud has Nutshot internals , super duper ! The reg has had to be re-set to allow for the short barrel , and it's doing 11.4 with RWS Super domes , so I've been told , with a spread of 6fps . Once the hammer spring , hammer , and all the other bits are polished up , that 6 will be reduced even more . Black stock , nice looking rifle . Feel like a kid before Christmas lol
  11. Buster321c
    i will second that! Copy cat
  12. Buster321c
    NO , in a word . Regulators are really fantastic but learn the power curve before you think about regs
  13. Buster321c
    I can vouch for this as i know what work has been done to get it up to this standard . Any buyer will have a fantastic bit of kit .
  14. Buster321c
    you might not see em , very tiny cuts, .
  15. Buster321c
    put a tiny dab of grease on a screw driver , there will be a very small hole on the butt pad ( well 2 actually one at top , one at bottom ) slide screw driver through the hole , job done
  16. Buster321c
    Cal ?
  17. Buster321c
    As far as i can see , instead of messing he should have re assured you that as it beds in it will increase in power . I guess he did try to get away with it , but has offered to `sort you out` which i guess is fair enough . At the end of the day , all he wants is happy customers , cause at least that way you will go back . Bust
  18. Buster321c
    Well the choice is yours isnt it . New gun , or some bits . Personally ide want a garuntee that when it creeps over he will settle it back down again .
  19. Buster321c
    Well really he`s not gotta give you anything . It like checking your change when you get home isnt it . It should have been checked in the shop . And any 3 week old gun that has been put up to 11.3 is going to give you more problems when it beds in , over the next 1000 pellets it WILL creep over power .
  20. Buster321c
    Ok mate , not your fault . I know a couple of people over that way who ferret . I`ll let em know to keep their eyes and ears open bud .
  21. Buster321c
    Im aware of the tittle , but Wolverhamptons a big place . Its like saying `lost ferret , London ` Ok Brains ? a little thought before you jump the gun , helps alot in the long run ..... Seeing as im in Wolverhampton and know a few people an area would help .
  22. Buster321c
    area ?
  23. Buster321c
    No offence taken mate . Domes , as all pellets will `twist` as they fly , as per the rifling in your barrel . Even if they are a a bit one sided they will follow a true path , where as a flat head will not . They both twist , but the domes will work best 100% mate .
  24. Buster321c
    Where are you Jonsey , PM if prefered
  25. Buster321c
    Mate , how do you come to the conclusion that dome heads are going to `drift ` off course ? And if they , being aero-dynamic , `drift` , how the hell do flat heads stay on course ? also what makes you think you can make better pellets than the tried and tested brands , that invest vast amounts on their products ? Original post makes no sence to me what so ever .......
×
×
  • Create New...