maty j
-
Content Count
2,283 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Articles
Gun Dealer's and Fieldsports Shop's
Reloading Room
Blogs
Calendar
Store
Classifieds
Everything posted by maty j
-
link
-
I think you mean 12 ftlb Anyway, I would of thought It would be ok unless there's a powerwheel on the rifle so you can easily change the power??
-
No where for the air In the end chamber to escape to so the only way It could escape Is to blow the shroud! Venting the front bushing on the Talon helps I've heard and drilling some air venting holes In the frame. Shooting at high power you can really feel the air blasting out of the holes In the frame!!
-
Shit luck Chimp Remove the safety, Nothing for your mate to get confused with then. And don't let the fuzz know your going out Was there much damage on the motor? Lucky It never hit the tyre, I'd imagine an airgun pellet would just bounce off
-
Back on the road... Your car not very well?? I had my package today so can crack on with that at the weekend as long as I remember to pick up the other pieces tomorrow. ThenI just need to order 1 diode and I'll have the full kit. I had the parts list with the maplin codes written along side but have "misplaced" It I would of took a pic of It and emailed It over If I still ahd It on hand. If there's anything they can't sort you out with let me know and I should be able to
-
Cheers Chimp I did see It on there and was shocked TBH Good job my front bush Is vented I can feel the air hitting my hand when I fire on occasions and wondered where It Is from. Now I realise It's the air from inside the rifle housing escaping through the 3 holes drilled underneath the grip Still a good point you raised. You get my PM? I've found a supplier of 18" and 24" barrels In USA - They are LW though not BSA. I've got a 800cc tank on the way too I'll keep an eye out for a 16"-17" barrel next just so It comes to the end of the rifle housing so I can keep my silencer adaptor. The 18
-
Will do. Hopefully should be done soon. I'm probably on the most complex part now after that It should be a doddle providing my connections are good and correct Maplin should have all but a few parts, 2 caps I think which are the ones I ordered from the US. You must of had one of the shit guys. I went to mine and the guy was spot on. Even rang another guy up to see which transformer It was i needed The resistors are a piece of piss too, Just check the colour strips on them to the ones on your parts list. There not going to be exactly the same but you should get the hang of It and It will giv
-
Get your soldering iron out.... That will keep you buisy for a good while My package from america should be here soon. I'll just get some gear from work and then will be on my way with ALOT of luck let me know If you need anything...
-
Got a link? PM me If you prefer... The one I saw was one of the spaniards and dogo's hunting up this puma/big cat till It went up a tree. They then lasooed It, pulled It down and the dogs piled In. There was a decent pack but there was some nasty injurys on some of the dogs. It showed the spanish men sewing the dogs up In the field after too.
-
There's a vid on youtube showing the guys roping a puma or big cat from up a tree and the dogs piling In on It. I'm pritty sure they were Dogo's.
-
Good work KC1
-
They weren't carrying anything so they either didn't bag anything or It was under there jackets, Only looked about 15 or so. I went up looking for a few longtails that way but couldn't find any. Plenty of rabbits though but that's usually the case right on the rail lines. The field over the road from the school used to be packed along the hedge by the road but It has gone quiet round there. No suprise really..... Still a few closer to the farm where no one else seems to go. Seen many earths on your travels?
-
The whisper, Is thast the 125 quid one There's some on there for like 265 quid :icon_eek: Only chance I would pay that Is If the muzzle crack was non existant with It fitted!! What sort of power can the wehirach take then and how do I know If It's been over done?? I think your right about the innards of the weirach silencer too klarakoi, There Isn't alot In there at all...
-
I don't go that way often but know where you mean. I've been keeping buisy but not canning them. There's a few on that patch If you know where to look. Not many out In the day but there In the same spots when they are. Hardly any at night either though now. I saw 3 lads coming out of a field by the railway yesterday with riles on there backs. They then walked along the main road towards the co op I only have to flick the lamp on and there fuzz are on to It I was up doing a few fields by plas powis woods or whatever It's called one night a week or so ago. It's shit up there Hardly any rab
-
I'm not a million miles away
-
What's In your weihrach one? Looking down mine not alot. There's red plasticy shit inside at both ends and some washers In the middle
-
:clapper: His other one has been flagged as not being suitable for minors
-
Weihrauch Hyp? I've just bought one and havn't tested It out proper yet, The guns on the blink.....Again I've heard there quite good so looking forward to trying It proper. I thought they would be quite good Chimp but obviosly not. I was out for a night using a mates rimmy and that was near silent with what looked like the SAK mod so that's part of the reason behind the question. On these big bore airguns on youtube you never usually see a mod on the end of the barrel either. Strange I thought as they make a fair crack! Cheers for the replies, Will stop me wondering now
-
Just looked on Euroguns and It says you need to have space on your FAC for a silencer. Any reason why you need a FAC for a silencer ?
-
Just sat at home the other day wondering one of those strange questions. Would a rimmy silencer work better on an FAC rated airgun than an standared airgun silencer? The SAK silencer has a 1/2" unf thred I think so could be used on alot of airguns yet It Isn't as far as I'm aware. Same with a few of air rifle silencers so I was just wondering why you never seem to see a rimmy silencer on an air rifle and vice versa??
-
Don't know, I havn't got that pistol but It sounds like that's your problem. Try searching for the plans of the rifle or just take It apart and take carefull notes as you go so you remember how to re assemble It. Replace all the seals, re lube everything at the same time.
-
Instant picture - no delay
maty j replied to zig zag wanderer's topic in Wildlife and General Photography
You should pick up a 300D about 130-160 quid I would of thought? Even stretch to a 350D If you have the cash. Don't forget to budject for a decent lens suited for what you want..