Phill-W68 547 Posted April 15, 2018 Report Share Posted April 15, 2018 Filled the hw100 up a couple of days ago and it's empty, gutted, filled it again it's leaking air slowly but can't find d where from I cannot hear nothing leaking anywhere, the cylinder seems tight and not loose,. Would it be worth changing the air cylinder seal before panicking and taking it to a shop? Quote Link to post
mark williams 7,549 Posted April 15, 2018 Report Share Posted April 15, 2018 I think you may have a leak on your inlet seal. Just got mine back and it had exactly the same symptoms, - I`m no gunsmith though Phil . Good luck with it. 1 Quote Link to post
pav 481 Posted April 15, 2018 Report Share Posted April 15, 2018 Take your fill probe off hose and put it in fill port put a bit spit on see if it bubbles then seal gone in there if no bubbles screw bottle off and look in block there a pin with small oring on it will probably be that one 2 Quote Link to post
Phill-W68 547 Posted April 15, 2018 Author Report Share Posted April 15, 2018 36 minutes ago, pav said: Take your fill probe off hose and put it in fill port put a bit spit on see if it bubbles then seal gone in there if no bubbles screw bottle off and look in block there a pin with small oring on it will probably be that one Cheers, will try that before taking cylinder off... ? 1 Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.