Sling Stud

[night warrior 178]

Hi all is there any thing that can be done with out screwing a nover hole as the stud on the stock has come out and is just to big to screw stud back in it fits in but not inof to trust it to old is there any thing that can be done with out screwing a nover hole and as a result of the stud given way the silancer hit the ground and has chipped the black off is there a way of sorting that out thanks for tacking time to read atb

[zandy01 3,576]

Could you plug the old hole with a bit of dowel type thing then redrill and fit stud into where you've plugged ???

 

Depends how hands on you are really, or maybe a mate or joiner could help..

 

Visla done my HW100 as described as original owner drilled and fitted stud instead of buying a proper HW100 stud which just replaces existing bolt...

 

Just looks like there's a knot in the wood now but yours would be even better as you'd be covering with stud anyways so wouldn't see nothing...

[night warrior 178]

Thanks for replying mate I'll keep that I'm mind as seems a good idea let's see if any body else can help if not will go with that thanks again atb

[Durham John 693]

Depends what gun its into and but or fore end.

If its front end you could get a metal plate rebated inside with a threaded hole lining up with original hole so the studs puts all the weight through the plate not the hole and no extra holes.

[night warrior 178]

It's in the but end and it's a bsa r 10 mate

[David.evans 5,323]

As said not to bad in the stock end , plug it

And re -drill about 1 inch either way , should be ok

[walshie 2,804]

Wouldn't that plastic wood filler work? It's tougher than wood when it dries and you could drill it to put the stud in. That's what I'd try first anyway.

[toby63 1,236]

Wouldn't that plastic wood filler work? It's tougher than wood when it dries and you could drill it to put the stud in. That's what I'd try first anyway.

or a two pack wood filler be alot stronger

[mark williams 7,568]

Three matchsticks at right length, fill hole with wood glue, push in match sticks and re screw sling stud.

Wipe clean with a damp cloth and leave to set, untouched for a few days or simply use a raw plug.(brown one).

[The one 8,595]

When mine popped out I put it back in with super glue