Bigad 136 Posted September 5, 2014 Report Share Posted September 5, 2014 Took end of the moderator to try clean internals a bit better and as the last owner of the set up I got had never cleaned it thought I would have a go . There was a black pad wrapped round a vented tube the pad was brittle from half way up and crumbling to bits. Take it this should not be like this and is it time to get another mod ? Quote Link to post
shropshire dan 467 Posted September 5, 2014 Report Share Posted September 5, 2014 .17hmr mods can and do wear out mate. What mod is it matey Quote Link to post
D Lloyd 2,790 Posted September 5, 2014 Report Share Posted September 5, 2014 only the fukers on thl lol 1 Quote Link to post
walshie 2,804 Posted September 5, 2014 Report Share Posted September 5, 2014 I'm properly worn out. Quote Link to post
Bigad 136 Posted September 5, 2014 Author Report Share Posted September 5, 2014 Don't know only says np .22lr on it Quote Link to post
Wildling 520 Posted September 5, 2014 Report Share Posted September 5, 2014 Any chance of putting some photos up for a diagnostic!? Quote Link to post
shropshire dan 467 Posted September 5, 2014 Report Share Posted September 5, 2014 As said try and get some pics up mate. If it says .22lr on it then surely its not adequate for hmr mate. Although even a dedicated hmr proofed silencer will wear over time. And wear quick with alot of rounds in one sitting. Quote Link to post
Cedric 132 Posted September 5, 2014 Report Share Posted September 5, 2014 With a pad inside it sounds like an air rifle mod. Anyhow, just chuck it away, a decent SAK is cheap. I've got a spare I could give you buts it's on my FACert. and would need to be in person. PS. When I say "chuck it away" you need to get a RFD to dispose of it otherwise it will still be on your cert. Quote Link to post
Sussex Stalker 7 Posted September 6, 2014 Report Share Posted September 6, 2014 (edited) With a pad inside it sounds like an air rifle mod. Anyhow, just chuck it away, a decent SAK is cheap. I've got a spare I could give you buts it's on my FACert. and would need to be in person. PS. When I say "chuck it away" you need to get a RFD to dispose of it otherwise it will still be on your cert. Agree with the above sounds like the baffle on a air rifle mod. Chuck it away and get a new modKev Edited September 6, 2014 by Sussex Stalker Quote Link to post
Bigad 136 Posted September 6, 2014 Author Report Share Posted September 6, 2014 I'll bob a pic up of the markings on it but sounds like a new one is due anyway Quote Link to post
Bigad 136 Posted September 6, 2014 Author Report Share Posted September 6, 2014 Here you go Quote Link to post
Bigad 136 Posted September 6, 2014 Author Report Share Posted September 6, 2014 That is not pitting on it there was a stick camo fabric on it from last owner Quote Link to post
ianm 2,594 Posted September 6, 2014 Report Share Posted September 6, 2014 Bin it and buy a sak they are only about £35. Quote Link to post
shropshire dan 467 Posted September 6, 2014 Report Share Posted September 6, 2014 I had a hogun decimeater on my hmr and that was great. A little better than a sak but for the money saks are great. Quote Link to post
abarrett 462 Posted September 6, 2014 Report Share Posted September 6, 2014 Parker hale mods on a 22lr are good as anything and only about £20 I got a sak on my 17 does the job no problem Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.