Jump to content

Recommended Posts

At the back end of last year I decided to treat my BSA R-10 to a Huub shroud and move the VC Silencer from the R-10 onto my Scorpion.

 

I'm sure you all know what they look like as standard but here goes...

 

20131129_123641_zpsb6fd456c.jpg

 

This is what the R-10 looked like with the Huub fitted...

 

20131202_132211_zps7bae9324.jpg

 

The R-10 is mainly used at the range and every now and then used for hunting when I fancy a change from the Scorpion. The Huub shroud is brilliant, it seems to balance the rifle much better and is just as silent as the VC silencer. For ages I've been thinking about pulling out another £100 for a Huub for the Scorpion and eventually did it last Thursday and took delivery on Friday.

 

Over the moon is an understatement!

 

1512487_636143999802407_6524366339481151

 

Interestingly Huub seems to have changed the internals in the last 6 months changing the only plastic part to alloy and changing the size of the 'hair rollers' so you don't need to cut them down to size.

  • Like 4
Link to post

Yeah it'll fit, mines an SE.

 

Fitting is that simple it doesn't need explaining.

 

Slide down the barrel the block that's fits around the magazine latch and secure in place with 3 grub screws.

Screw an alloy cone onto the end of the barrel.

Slide the shroud over the alloy cone all the way down the barrel then screw onto the magazine latch block.

Unscrew the end cap and add the washers etc...

Screw the cap back on

  • Like 1
Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...