What The Shortest Rimfire Mod Available?

[Born Hunter 17,638]

Oh right. Just didn't realise as theirs a price difference cheers

 

Paulus is being facetious! LOL

 

"When looking at moderators there are two different physical layouts, firstly the conventional muzzle-mounted moderator and secondly the less conventional reflex or telescopic moderator. The muzzle-mounted moderator as its name suggests, is attached to the end of the muzzle; thus the expansion chamber and baffles are all housed off the end of the muzzle. This greatly increases the overall length of the weapon; as a result this incurs both balance and handling penalties. The reflex moderator sleeves the expansion chamber back over the barrel greatly reducing the overall length - having only the baffles in front of the muzzle, this improves balance and handling as well as offering a more secure two point attachment to the weapon."

[shropshire dan 467]

Sound good. Wouldn't mind one for the .22lr as it has 24inch barrel and then an extra 5ish inch with mod. Will have a look at them in detail, how would I buy another mod when I have one in the slot. Would I have to get a variation for a second silencer? Thanks

 

Atb

Dan

[GEOFF.223 83]

Oh right. Just didn't realise as theirs a price difference cheers

A relfex mod partially slides over ur barrel to make ur overall length shorter but still gives u the same moderation of sound.

 

So the answer you got earlier (none) was alot of piss

[shropshire dan 467]

Cheers Geoff, I'm looking for 2 for the rimfires

[paulus 26]

 

Oh right. Just didn't realise as theirs a price difference cheers

 

Paulus is being facetious! LOL

 

"When looking at moderators there are two different physical layouts, firstly the conventional muzzle-mounted moderator and secondly the less conventional reflex or telescopic moderator. The muzzle-mounted moderator as its name suggests, is attached to the end of the muzzle; thus the expansion chamber and baffles are all housed off the end of the muzzle. This greatly increases the overall length of the weapon; as a result this incurs both balance and handling penalties. The reflex moderator sleeves the expansion chamber back over the barrel greatly reducing the overall length - having only the baffles in front of the muzzle, this improves balance and handling as well as offering a more secure two point attachment to the weapon."

 

 

 

 

Oh right. Just didn't realise as theirs a price difference cheers

A relfex mod partially slides over ur barrel to make ur overall length shorter but still gives u the same moderation of sound.

 

So the answer you got earlier (none) was alot of piss

 

people who don't read the whole thread often make the wrong assumptions

[d.nelson 9]

You will never fully silence a .17 hmr don't forget about the sonic boom

[Cliff Ray 185]

You can cut out the sonic boom, but it's a little impractical.

 

It's subsonic by 300 yards, so you just need a 300 yard moderator.

 

Make sure it's curved to match the drop of the bullet though

[Alsone 789]

You can cut out the sonic boom, but it's a little impractical.

 

It's subsonic by 300 yards, so you just need a 300 yard moderator.

 

Make sure it's curved to match the drop of the bullet though

 

That'll never fit in a Landrover and with the weight you might as well just cosh the rabbit with it!

Edited March 7, 2014 by Alsone

[Marksman 934]

Im using an A&M Proofed Twink MKII, cost is £60 and as good as any youre likely to come across

 

Darryl

[Elliott 436]

Im using an A&M Proofed Twink MKII, cost is £60 and as good as any youre likely to come across

 

Darryl

Wouldn't mind seeing a close up of that Darryl. If it's the reflex type A&M could be onto a real winner with that one considering the little difference between the HMR mods. Is it easy enough to strip and clean?

[Marksman 934]

It's not a reflex type but it's only 6" in length, easy to strip & clean too.

It's fitted to my CZ455 16" Varmint, both me and Wor kid shoot from a vehicle with them with no problems at all

[unlacedgecko 1,466]

A good way to reduce overall length would be a fully moderated rifle -

 

http://www.jmsarms.com/mae_article.php