villaman 9,982 Posted August 11, 2013 Report Share Posted August 11, 2013 Hi Reported last night that the HW100kt missing ever thing I shot at. Found out the scope out and the Falcon Accuracy plus shooting like a shot gun. Been pellet testing to day and came up with Daystate Li 14.3gr pellet on pellet at 30,35 and 40 yards, well I was gobsmacked with these coming out of the chrono at 616 fps which is over 12ftlb,so tested with AA fields 16gr which came out at 11.7 ftlb checked daystates again over 5 mags and the low came in 610 and high 616 so spent the next hour taking the power down to 11.5 ftlb. So spending the best part of the day testing ,went out to night for an hour and came back with these two shot at 40 yards 2 Quote Link to post
moxy 617 Posted August 11, 2013 Report Share Posted August 11, 2013 Nice going and its good to see you have tamed the power. Quote Link to post
The one 8,594 Posted August 11, 2013 Report Share Posted August 11, 2013 Nice going mate and the thing is up here i could get more for the squirrels tail than i could for the rabbit Quote Link to post
risingfriend 1,042 Posted August 11, 2013 Report Share Posted August 11, 2013 Nice one vm Quote Link to post
jandcguns 65 Posted August 12, 2013 Report Share Posted August 12, 2013 good going vm, nice to see the hw100 on form Quote Link to post
gosling1960 191 Posted August 12, 2013 Report Share Posted August 12, 2013 Good shooting. Quote Link to post
Skot Ruthless Teale 1,701 Posted August 12, 2013 Report Share Posted August 12, 2013 Villaman.. is it easy to adjust the power to LOWER it. If mine goes over it will be a blag sending it off to hull cartridge to get it lowered Its a new gun tho so i dont want to void my warranty. PM me mate cheers Quote Link to post
toby63 1,236 Posted August 12, 2013 Report Share Posted August 12, 2013 theres a vid on you tube about adjusting the power Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.