one-in-the-net 24 Posted July 19, 2013 Report Share Posted July 19, 2013 just tried zeroing the r10 mk1 ive just got and no chance at 25 yards every pellet is from a inch to 5 inch of target looks like ive got a bad one any advise on what i should do lads ? Quote Link to post
Marksman 934 Posted July 19, 2013 Report Share Posted July 19, 2013 Have you got a silencer fitted? If so try with it off Darryl 2 Quote Link to post
AR177 588 Posted July 19, 2013 Report Share Posted July 19, 2013 (edited) that's a shame, try darryls suggestion if that dosnt sort it make sure your scope etc is solid and dosnt move, what pellets are you using? .. if its non of those then Probably two choices, pay to have it serviced and sorted out by someone who knows what they are doing or sell it problem is everyone knows they are notorious for problems and anyone reading this knows yours has got issues .... Edited July 19, 2013 by AR177 1 Quote Link to post
one-in-the-net 24 Posted July 19, 2013 Author Report Share Posted July 19, 2013 ive tried with out the silencer and shroud aswell and tere aa field pellets ive just called xtx air its £200 for a tench reg and tune :/ proper gutted tbh lads Quote Link to post
AR177 588 Posted July 19, 2013 Report Share Posted July 19, 2013 I think bowkett is cheaper than that? and he designed the gun so he knows what he is doing with tench you have to pay more for their own reg? 1 Quote Link to post
barrywhite 282 Posted July 19, 2013 Report Share Posted July 19, 2013 check the gun is shooting consistently with a crono .check the scope and barrel are tight no movement . [ the scope may have a fault ????]. check the crown has not been damaged .clean barrel ????. and you are using good quality dome pellets . 1 Quote Link to post
one-in-the-net 24 Posted July 19, 2013 Author Report Share Posted July 19, 2013 GOOD NEWS just tried with a biesly pellet and 20 out of 20 at 30 yards bang on the money ad chronod it , its shooting 11.8 with bisley so maybe its pellet fussy well happy now lol Quote Link to post
silentshot1 206 Posted July 19, 2013 Report Share Posted July 19, 2013 To be honest it sounds like you need to stop worrying. It takes time to bed in new gun and get to know it. If you do get it tuned, then without new reg, Darrin charged me £100 and that made it awesome. Good luck with itand 3 Quote Link to post
digging-deep 518 Posted July 19, 2013 Report Share Posted July 19, 2013 The same things happening to my hw100 5 put of 7 pellets are tight then there is a few that go wide Quote Link to post
one-in-the-net 24 Posted July 19, 2013 Author Report Share Posted July 19, 2013 just been shooting a old shot gun shell at 40 yards hit it 10 out of 10 with the bisleys Quote Link to post
Marksman 934 Posted July 19, 2013 Report Share Posted July 19, 2013 So you never tested any other pellets other than Air Arms?? If I were you I'd try a few more different brands at groupings on a plain piece of paper and see what groups the tightest. Darryl Quote Link to post
one-in-the-net 24 Posted July 19, 2013 Author Report Share Posted July 19, 2013 its a new gun pal only got it last night thanks tho will do Quote Link to post
villaman 9,982 Posted July 19, 2013 Report Share Posted July 19, 2013 Is it .177? if it is then try Daystate heavies or jsb heavies same pellet 10.3gr or H&N hunters extreme 9.5 gr . BSA barrel like heavier pellets Quote Link to post
one-in-the-net 24 Posted July 19, 2013 Author Report Share Posted July 19, 2013 no pal 22 Quote Link to post
Lewis Ste 245 Posted July 19, 2013 Report Share Posted July 19, 2013 My r10 likes bis mags and jsb exacts in 4.53 Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.