Jump to content

Mk3 locators knackered, any ideas??


Recommended Posts

Just changed the batteries in my mk3 collars and receiver and 2 out of them out of the 4 aren't working.

They don't even bleep when I try to switch them on. I aren't sure if they were working before I changed the batteries because I haven't used them for a couple of months.

Has anyone any ideas, they are less than 12 months old so should still be covered under the warranty, but can't find the receipt.

They seem to be a sealed unit so I presume they can't be repaired.

Any help or ideas to try and get them working would be appreciated!!

 

Link to post

i have been testing collar batteries brand new ones saying 1.53v i put them in collar switch on and its working fine switch off and left for 1hour then checked batteries one read 1.52 the other was 0.62 they are draining for some reason, but yet collar is switched off, even if it wasnt switched off they should last for days, all deben said was buy a new collar

Link to post
  • 2 weeks later...

i have been testing collar batteries brand new ones saying 1.53v i put them in collar switch on and its working fine switch off and left for 1hour then checked batteries one read 1.52 the other was 0.62 they are draining for some reason, but yet collar is switched off, even if it wasnt switched off they should last for days, all deben said was buy a new collar

 

Have had the same problem with a couple of Mk3M collars where I put brand new batteries in the collar and turn them off. A few hours later one of the batteries is flat. If the collar is left turned on then the batteries last as they should.

 

Would love to know how to fix this.

Link to post

i have been testing collar batteries brand new ones saying 1.53v i put them in collar switch on and its working fine switch off and left for 1hour then checked batteries one read 1.52 the other was 0.62 they are draining for some reason, but yet collar is switched off, even if it wasnt switched off they should last for days, all deben said was buy a new collar

 

Have had the same problem with a couple of Mk3M collars where I put brand new batteries in the collar and turn them off. A few hours later one of the batteries is flat. If the collar is left turned on then the batteries last as they should.

 

Would love to know how to fix this.

i have exactly the same problem with one of mine,i even put sony batteries in just to try normally i can get a good few hours out of them but still flat as a fart next day,i think i prefer the other mk3 collar where you have to remove the batteries at least i can test them before i put em back in!!!!

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...