alan626 305 Posted January 18, 2011 Report Share Posted January 18, 2011 do not hit that rivid with a hammer and nail u have drill it out with a small matal bit then the bulb housing will pull out allow u at the wireing . when ur finished putting it back togeter wrap an inch of the handle and an inch of the new wire in insulating tape the tape takes all the strain climbing trough ditches and climbing gates ect ect Quote Link to post
WILF 51,362 Posted January 18, 2011 Report Share Posted January 18, 2011 The wire in the handle... Come on gaylord, we did Justins at a kitchen table with some very basic kitchen utensils!!.......even you can work it out. Quote Link to post
biza hollis 27 Posted January 18, 2011 Report Share Posted January 18, 2011 Problem being, i need it for tonight as i have a few rabbits to run. Any help will be appreciated. like tiny said got to get that out to get into the wiring dont the bottom come out of the handle or is this just on the old ones remember dont touch the bulb with fingers a bit of cloth you will get there in the end mate i did atb biza Quote Link to post
ruby jet 184 Posted January 18, 2011 Report Share Posted January 18, 2011 The wire in the handle... get a night eye mate its the old striker with the switch on the back and the wireing dont feck up Quote Link to post
Guest AngelicAcid Posted January 18, 2011 Report Share Posted January 18, 2011 JUST TIED A KNOT IN THE WIRING IN THE HANDLE, ITS BEEN THE CONNECTORS THAT JUMP FOR ME BETWEEN THE BATTERY AND THE CABLE. Quote Link to post
DottyDoo 500 Posted January 18, 2011 Report Share Posted January 18, 2011 i put a cable tie on inside a my handle around the wires, so thats what takes the strain Quote Link to post
boyo 1,398 Posted January 18, 2011 Report Share Posted January 18, 2011 got 2 blitz here at the mo with wiring problems one inside handle and other on ciggy conection about time they sorted it out cos other than that their brilliant lamps but the wiring real piss off . Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.