Jump to content

weebster

Members
  • Content Count

    217
  • Joined

  • Last visited

Everything posted by weebster

  1. I've played around with 2 sony cams in the past,both with the biggest chip size in ccd and cmos that sony did at the time.(not including the latest sony cam) Nightshot plus is a waste of time and won't work as well as plain old 'nightshot' mode,you should have both with an option in the menu to switch off nightshot+....also switch off the built in ir light on the cam in the menu. You need a lot of ir light if using an led type,camcorders work better with ir lasers then they do with ir led,unless it's a decent led like the oslon black but even then once attached to a scope they won't match a
  2. Oslon black,same as nm800ir,driver is a stand alone not a conventional pcb driver board as it runs off the 12v battery rather than 18650's.
  3. The difference may well be down to the quality of the aspherical lens,they can vary quite a bit,and as said,just back of the focus a little The torch I made will focus down to the square diode with thick line and thinner lines coming of at right angles....just back off a little and I get a perfect circle well over 200yds.
  4. Yes....probably leading to 'nitehunters' great ir turbo ...if nm are using a 66mm head then they've copied what other's are doing imo,and a complete torch with 66mm lens can be built for £70. I'll stick to my home build oslon black zoomie http://i1009.photobucket.com/albums/af220/weebster6419/ir%20host/STA62455_zpsa63c1c15.jpg Small,compact and easy to zoom.
  5. Rust on the outside won't be too much a problem,however....on the inside of the cylinder is a different matter,I would inspect the inner air cylinder before putting full pressure into it.
  6. Interesting thread,I feel i'm in agreement more with mileagojo,after having built a diy system without the large box come screen come ir light I can see just how cheap the component's can be,more so using camera boards and buying by the box load. I have a watec 902h based system that will match and probably beat the ns50 and with a decent laser will more than match the ns200,as it stands now the cost is less than £150,.. to match the ns200 would cost no more than £250 tops. Maybe the cost is down to all the plastic bits and bobs that come with the ns systems?,I should think they're purpos
  7. if you are a Graham get yourself down to the meet in Swindon I'm sure 1 or 2 could help you out :laugh: lmao
  8. The only reason robbing little scum like you don't get arrested for this is because at the moment the law consider's it a civil matter rather than a criminal matter,hence why little boy scroats like you get away with it.....at the moment,but that is going to change in the not to distant future. Instead of spending any of your OWN money on guns why don't you get to "nite skool" and spend it on spelling lesson's you thick ***t
  9. nice one jonezy,i'll look forward to reading the details
  10. "so sorry i've been a twat".........well you got one bit right graham junior,the "twat" bit. Thanks to your kind buying and selling on here is now a high risk. Hopefully you'll get what's due to you,legally or otherwise. PS. Your poor spelling and grammer gives you away again...........
  11. Hi jonezy,have you tried ringing parcel force?,maybe explain the situation (but not that a gun is in the package,against pf's rules) and try and get the parcel held at the delivery depot where it is now. according to tracking number it's on the verge of being delivered.... Parcel tracking details Progress of the parcel you've enquired about is displayed below. Parcel number: FWKC5186505GB Status: In progress Parcel tracks Date Time Location Tracking Event 09-05-2012 23:53 Gloucester Depot Received at delivery depot
  12. If the only thing stopping you from shooting it is the stock,why don't you just buy a cheapie rh stock,get a few on the bay from time to time,the bolt is easy enough to swop to rh on these rifles. You must admit .......your ad looks a little suspect,i see you have a 2nd ad for this rifle now at £150 with scope and hw silencer. I'm afraid that old saying "If it's to good to be true etc etc".....and there seem's to be some history of scammers from your area. Anyhow,look's like you have a buyer f2f on your 2nd ad,probably the best way to deal with it.
×
×
  • Create New...