Jump to content

fry

Members
  • Content Count

    1,037
  • Joined

  • Last visited

Everything posted by fry

  1. yeah well i changed the batteries in it and it was the same detinately not put in wrong weights. i will try my 410 through it see if thats reads under as well. i have been thinking about it and if there is a fault it must be losing past the piston seal the spring is new. all said and done i only have a combro. i will ring blackpool rifles and ask them what they reckon.
  2. hi all last christmas i swapped a 400 for a pro sport thought i would treat it to a v-mach kit ! have been well happy had it set at 11.2 with daystate 7.9 grain pellets, any way chronoed it today as on here i have read the power creeps up, well its down to 9.6 with daystate 7.9 grain an 10.6 with aa fields 8.4 grain gutted . i stripped it down it all looks fine cleaned it up regreased it an put another washer in it to raise the power ! chronoed it again no change put the old breach seals in no change. any one got a clue i am well pissed off the seal looks fine. help any one please.
  3. and the moral of this story is if you cant meet face to face its never worth the bother.
  4. and the moral of this story is if you cant meet face to face its never worth the bother.
  5. been busy an away but this was a laugh. what was the new springer zini was on about that was going to blow the pro sport an hw 97 out the water any one know?
  6. interesting stuff had my firsrt 177 and wind experiences not easy to zero shot nothing
  7. mmmmmm very interteresting had my first i77 w=and wind experience last night doesnot make for easy zeroing
  8. put another lod washer in it brung it up to 11
  9. welll i got daystates 7.9s doin 10,56 ish qn aa fields 8.4 doin 11.20 retty consistant is thatg right??
  10. if you say put a 177 pellet that is lighter say 7.9gr through the same rifle and then with a heavier 8.4 pellrt will the readings very a lot thanks
  11. to be honest its daft getting some one else to decide for you, and really if your heart is set on a frugal simple life you might as well keep it simple and having stripped a prosport it does not get more simple than that! i should imagine a tx is the same so keep your tx or get a pro.hw s are well respected but it aint possible that they are simpler to maintain than a tx or pro.
  12. o not even a spot of oil then (which is what i would of done} cheeers
  13. i went country side alliance this year after the BASA fiasco torment balls up never heard of sacs are they good then ? an marty unless you shoot only on a indoor range that you own you must be mad not to have insurance mate .
  14. so in theory then if the hammer is polished right up (something i intend to to do when i service the 410) it will be a bit lighter! will this alter things? It will decrease lock time , but dont over do it , there is no need to "polish" it , just take the,roughness of it to make it travel better in the carrier thanks for that
  15. so in theory then if the hammer is polished right up (something i intend to to do when i service the 410) it will be a bit lighter! will this alter things?
  16. well done mate new perms are the best 3 days a week s plenty specially if its heavin with rabbits ! its not just shooting them its skinning and gutting too i rarely do more than 5 or 6 because of this.
  17. what a load of it mate you need a permission off the nosey parkers gaydar.
  18. thats not the point is it the point is that you have to phone before you go and then answer your phone to them while you are in the field. you may as well take your laptop and skype them then you could chat to them the whole time you were out.
  19. well that is reason enough for me not to ring them to be honest i really dont want people ringing me, especially them to do their job for em.
  20. well about bbs you learn some thing new all the time!
  21. never call them how would i call to tell them 999
×
×
  • Create New...