Help needed

[Rentomski 0]

OK. i put the empty shell in, work the bolt but it doesnt pull the shell out.

The extractor claw seems ok, it move out and springs back in fine enough .

 

Take the bolt out and fit the empty case onto the bolt face and have a look at how much retention the extractor claw actually has on the rim.

[SNAP SHOT 194]

OK. i put the empty shell in, work the bolt but it doesnt pull the shell out.

The extractor claw seems ok, it move out and springs back in fine enough .

 

Take the bolt out and fit the empty case onto the bolt face and have a look at how much retention the extractor claw actually has on the rim.

 

yes agreed............ with above all sounds suspect to me..............warrenty job mate.............dont try anything your not to sure about...........disapointing on a new gun

[trappa 518]

The extractor claw "seems" to have a decent amount of retention so i cant work it out?

Im hoping im doing something really obviously wrong, as surely a brand spanking new gun wouldnt go wrong straight away.

Im absolutely gutted here, really sick.

[Deker 3,478]

OK. i put the empty shell in, work the bolt but it doesnt pull the shell out.

The extractor claw seems ok, it move out and springs back in fine enough .

 

Take the bolt out and fit the empty case onto the bolt face and have a look at how much retention the extractor claw actually has on the rim.

 

yes agreed............ with above all sounds suspect to me..............warrenty job mate.............dont try anything your not to sure about...........disapointing on a new gun

 

 

That says it all and is sound

[SNAP SHOT 194]

last stop, check with a different type of ammo or brass..............as it may be a faulty case problem.........

if this doesn't solve it its a warrenty issue...............sadly

[Rentomski 0]

The extractor claw "seems" to have a decent amount of retention so i cant work it out?

Im hoping im doing something really obviously wrong, as surely a brand spanking new gun wouldnt go wrong straight away.

Im absolutely gutted here, really sick.

 

Are there any marks on the rim where the extractor claw should have engaged on the case?

[trappa 518]

Nothing that stands out!

Ive tried it about 2o times in the last 5 mins, and about half of them eject, half dont. Could it be a wearing in thing?

the wife suggested some wd40 so ive gave it a squirt and it seems to be the same

[Rentomski 0]

Sounds like a warranty claim unfortunately, certainly not usual to have such problems with a new rifle and factory rounds.

[SNAP SHOT 194]

take the gun back to the shop you bought it in, warrenty...................don't do anything that they may say would make the warrenty void..........and good luck.

[trappa 518]

Ok, cheers boys. I will take it back midweek. Really pissed off.

[SNAP SHOT 194]

keep your head up mate, and remember you paid good money for the gun so they should sort you out.........

[trappa 518]

Cheers mate. Ye, im a bit pissed off, but i'll get it sorted.

[lgray88 4]

my new sako quad which is obviously rimfire and not centrefire but same principal , i started using cci blazers in it first id fire theround but it wouldnt pull out the fired round , after moving over to winchesters which worked fine , i went back to using the cci's as i have run out of the winnies and now it seems to be ejecting the empty round no problem it may be a just a wearing in thing , but if you want true peace of mind id send it back but it you could just try a few more rounds its maybe that the case is pretty tight in the breach .

 

liam

[jamie g 17]

Cheers mate. Ye, im a bit pissed off, but i'll get it sorted.

 

easy fix mate dont worry.