airsporter 22

[bigmac 97kt 13,735]

Was not going to do a thread on this

but thought feck it lol

 

[bigmac 97kt 13,735]

[bigmac 97kt 13,735]

[bigmac 97kt 13,735]

[bigmac 97kt 13,735]

Stock is plain with next to no grain in it

so ill just do the best i can lads nearly ready for the oil

atvbjimmy

[SKoT wolf 100]

12 minutes ago, bigmac 97kt said:

Stock is plain with next to no grain in it

so ill just do the best i can lads nearly ready for the oil

atvbjimmy

Lookin good jimmy. Is that lever to break the barrel? I had an old rifle that did that when i was a kid

[sparky the hunter 69]

HI Jimmy

 

What are you using for Bluing?  I have a couple of old meteors and a cadet i want to do so any advice would be appreciated.

Regards 

[bigmac 97kt 13,735]

2 minutes ago, SKoT wolf said:

Lookin good jimmy. Is that lever to break the barrel? I had an old rifle that did that when i was a kid

No skot its to load the pellet into the rifle

put the pellet in and push the leaver down

the airsporter is like the prosport its an under leaver and it tucks into the stock

now you know where AA got the idea for the prosport lol

atvbjimmy

[bigmac 97kt 13,735]

Just now, sparky the hunter said:

HI Jimmy

 

What are you using for Bluing?  I have a couple of old meteors and a cadet i want to do so any advice would be appreciated.

Regards 

Philips professional gun blue

but it all comes down to the prep before you even start the blueing

do as it says on the bottle and you should be ok

i degrease every thing first then use rust remover then degrease again

put gloves on when doing it and change them when you start the bluing

as the natual grease off your hands will contaminate the metal work you are going to blue

do not get dis heartend if it looks like its not going to take just keep at it and it will take

all of a sudden it will start to change

leave it for an hour once you have done it and it will start to go darker

hope this helps

atvbjimmy

[bigmac 97kt 13,735]

2 minutes ago, bigmac 97kt said:

Philips professional gun blue

but it all comes down to the prep before you even start the blueing

do as it says on the bottle and you should be ok

i degrease every thing first then use rust remover then degrease again

put gloves on when doing it and change them when you start the bluing

as the natual grease off your hands will contaminate the metal work you are going to blue

do not get dis heartend if it looks like its not going to take just keep at it and it will take

all of a sudden it will start to change

leave it for an hour once you have done it and it will start to go darker

hope this helps

atvbjimmy

O and there are plenty of utube vids on the prosses of bluing and the prep of it

[philpot 4,928]

The stock is a plain one Jimmy so I will be really interested to see the final result, might have a look to see if there are any more in the stock room where that one came from.

Phil

[sparky the hunter 69]

Thanks for the reply Jimmy

[lifelong cumbrian 1,793]

They where the Rolls Royce when we were kids

[bigmac 97kt 13,735]

4 hours ago, lifelong cumbrian said:

They where the Rolls Royce when we were kids

Remember my mates had them 

O how I wanted one 

But never got one 

I'm keeping this one as well 

Lol

Atvbjimmy

[bigmac 97kt 13,735]

Not sure if I like the stock 

May have to knock it back and start again