Reusing Kennel Floor Tiles

[jiggy 3,207]

.

Edited November 2, 2015 by jiggy

[pjmc 90]

Happy days jiggy that will tidy the hole ting up.ye your right about the hot water but it will only help it along it won't just fall of them,a 4 inch grinder might be quicker and no soaking lad just grind it of them

[jiggy 3,207]

.

Edited November 2, 2015 by jiggy

[northern lad 2,292]

Dont waste your time soaking them in anything Jiggy....small grinder ...only way to go Are the tiles ceramic or stone?If ceramic, soaking them in water can soften the tile more than the adhesive ,the back of the tile is porous,the front is not...as a general guide break one through ,if its the same colour all the way through its most likely a natural stone,if its different colour inside than out its deffo a ceramic Laid 1000,s over the years mate....Im a tiler BTW if they are natural stone don't forget to use impregnator on them after laying ,and before grouting to give them a good seal

Edited August 22, 2015 by northern lad

[jiggy 3,207]

.

Edited November 2, 2015 by jiggy

[northern lad 2,292]

Not happening lay blocks all day grind tiles all night ive a stomach full of hardship allready but maybe if i done one kennel at a time theres a lot of grinding in 400 tiles

Run at a time and an hour grinding as and when,its suprising how quick you get through them Shit...sound like the wife

[undertaker 830]

Turbo nozzle on a pressure washer shud do the trick

[jiggy 3,207]

.

Edited November 2, 2015 by jiggy

[ferreting 22 22]

Lay them in very thick adhesive and leave the old stuff on

Edited August 23, 2015 by ferreting 22

[nans pat 2,575]

Lay them in very thick adhesive and leave the old stuff on

yea that black tar for the wood,block floor do the job,