Wanted Wanted Career Air Riffle

[jay.boy.007 1]

Wanted career air riffle carbine if possible pm me cheers

[Colin g 45]

Got a full length one as well for £500, Carbine now £340

[Banter 1,751]

Wanted career air riffle carbine if possible contact no 07789671397 cheers

 

i had one mate an there shite

[Colin g 45]

He`s only asking for one, Not the opinion of your misfortunes.

[Banter 1,751]

He`s only asking for one, Not the opinion of your misfortunes.

maybe my opinion will save him wasting his money. the first pellet out them is 100% on target the other 9 or what ever are all over the place because with the streight mag everytime you cock it you shave bits of the next pellet.

[paulus 26]

He`s only asking for one, Not the opinion of your misfortunes.

its an open forum all relevant remarks are acceptable

[Colin g 45]

Yep they will do if your using dodgy pellets that your career is not set up for. Should set the feeder system properly then or get someone qualified to set it for you as obviously you were not up to the job, If your shaving pellets then you have cocked it up and will have to do it again. Send it to a professional and dont tinker with what you obviously know nothing about.

[Banter 1,751]

Yep they will do if your using dodgy pellets that your career is not set up for. Should set the feeder system properly then or get someone qualified to set it for you as obviously you were not up to the job, If your shaving pellets then you have cocked it up and will have to do it again. Send it to a professional and dont tinker with what you obviously know nothing about.

its a straight mag with a spring there is no setting up to do.an i was using the recomended bisley magnum an put hundreds of them through it..best thing you could do is put black felt tip on your second pellet an fire the first one out an empty the mag back out on a table .have a look at the one with the felt tip on it. il bet my left nut its shaved

[Colin g 45]

Banter you have to set the shuttle my friend with the allen key. without setting the shuttle it will slice off the ends of the pellet, How on earth can you fire variouse size pellets if it didnt have a shuttle to set, You adjust it for each pellet length, You can fire thousands of rounds but it will chop off every shot unless the shuttle is set, Been setting them since they where first imported and there is no change in the shuttle arrangment an any of the careers, You only have to set it once with your pellet and if you decide to change pellets you have to reset the shuttle, Hope this helps, Have a video if interested.

[Banter 1,751]

Banter you have to set the shuttle my friend with the allen key. without setting the shuttle it will slice off the ends of the pellet, How on earth can you fire variouse size pellets if it didnt have a shuttle to set, You adjust it for each pellet length, You can fire thousands of rounds but it will chop off every shot unless the shuttle is set, Been setting them since they where first imported and there is no change in the shuttle arrangment an any of the careers, You only have to set it once with your pellet and if you decide to change pellets you have to reset the shuttle, Hope this helps, Have a video if interested.

there was nowhere on mine for adjusting believe me

[Colin g 45]

I promise you there is banter, Just google career 707 pellet shuttle or http://www.pyramydair.com/article/Varmint_Kong_The_Laminated_Target_Stock_Career_October_2003/10

 

They have to have one buddy or they couldnt fire a heavier pellet, To gain weight on the pellet you cannot make it fatter or it wont go down the barrel so you have to make it longer hence a pellet shuttle, you may not notice it as you have to take off the scope and the two screws and remove the hunting scene piece and its all there for you to put whatever pellet you want to set it at...Wouldnt be much fun if a rifle only fired one type of pellet would it.

[Banter 1,751]

I promise you there is banter, Just google career 707 pellet shuttle or http://www.pyramydair.com/article/Varmint_Kong_The_Laminated_Target_Stock_Career_October_2003/10

 

They have to have one buddy or they couldnt fire a heavier pellet, To gain weight on the pellet you cannot make it fatter or it wont go down the barrel so you have to make it longer hence a pellet shuttle, you may not notice it as you have to take off the scope and the two screws and remove the hunting scene piece and its all there for you to put whatever pellet you want to set it at...Wouldnt be much fun if a rifle only fired one type of pellet would it.

groups in an inch at over 100 yrds mine you be lucky putting 10 in a barn door lol i seen that they can be adjusted do you want that nut in the post

[Colin g 45]

100yd is fac obviously but the shuttles the same, You would be surprised at how many i have bought banter over the years simply because people think they are buggered, They normally came in the box set to crosman prems, I like you used bisley mags once adjusted.

[Banter 1,751]

100yd is fac obviously but the shuttles the same, You would be surprised at how many i have bought banter over the years simply because people think they are buggered, They normally came in the box set to crosman prems, I like you used bisley mags once adjusted.

mine was fac lot power for an air rifle