scissorman 13 Posted May 19, 2013 Report Share Posted May 19, 2013 Put it away last week after treating it to A&M custom cylinder and Huntsman silencer fitted by them and tested had a few shots everything seemed 100%. Took it out this morning 100% NO POWER Cylinder was at full pressure but doubting it I removed it and put the original back on !! No change. Hoping some one has a fix for this as I just spent up last week. GUTTED IS NOT THE WORD !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Quote Link to post
ftm 3,357 Posted May 19, 2013 Report Share Posted May 19, 2013 dont own one mate but a pal ov mine has one & cylinder keeps leaking [apparent fault on mk 1,s] he is pissed off with it as weirauch are basically a very very good manufactured gun -billy Quote Link to post
scissorman 13 Posted May 19, 2013 Author Report Share Posted May 19, 2013 dont own one mate but a pal ov mine has one & cylinder keeps leaking [apparent fault on mk 1,s] he is pissed off with it as weirauch are basically a very very good manufactured gun -billy Cheers. Cylinder is fine no leaks ( both of them) Thanks for the feedback Anthony Quote Link to post
tomburras 2,730 Posted May 19, 2013 Report Share Posted May 19, 2013 Had what you describe happen on a falcon fn19 a few years ago, it was a broken hammer spring I'm not very knowledgeable with theese things but thought it was worth a mention. Quote Link to post
villaman 9,982 Posted May 19, 2013 Report Share Posted May 19, 2013 It could be a broken little spring in the trigger Quote Link to post
AR177 588 Posted May 19, 2013 Report Share Posted May 19, 2013 (edited) too much pressure in the bottles keeping a valve shut? Msg Marksman he is pritty handy with the ins and out of rifles ATB Adam Edited May 19, 2013 by AR177 Quote Link to post
barrywhite 282 Posted May 19, 2013 Report Share Posted May 19, 2013 too much pressure in the bottles keeping a valve shut? Msg Marksman he is pritty handy with the ins and out of rifles ATB Adam I was thinking this ...but hw 100 has a regulator ...so mabe something got into you gun when the cylinder was off and has now messed up your regulator ..if you lowered the pressure in the cylinder to 90 bar and your gun seemed to shoot ok this may be the problem. Quote Link to post
paulk73 151 Posted May 20, 2013 Report Share Posted May 20, 2013 Is it firing , but just spitting them out at a lesser speed???. It could be a faulty firing valve. had to have mine replaced on my 100 last year pal. Quote Link to post
scissorman 13 Posted May 20, 2013 Author Report Share Posted May 20, 2013 Thanks everybody for the advice. Have tried all your ideas but alas no joy So its a Kirklees Guns in Huddersfield now. When I get her back I will update you all. Thanks again. Quote Link to post
scissorman 13 Posted June 21, 2013 Author Report Share Posted June 21, 2013 Thanks everybody for the advice. Have tried all your ideas but alas no joy So its a Kirklees Guns in Huddersfield now. When I get her back I will update you all. Thanks again. Well got her back last week. had her out and everything is 100%. Seems it was just a coincidence just had a full service and all sorted. Cost £ and its likea new gun. 1 Quote Link to post
Skot Ruthless Teale 1,701 Posted June 21, 2013 Report Share Posted June 21, 2013 Thanks everybody for the advice. Have tried all your ideas but alas no joy So its a Kirklees Guns in Huddersfield now. When I get her back I will update you all. Thanks again.Well got her back last week. had her out and everything is 100%. Seems it was just a coincidence just had a full service and all sorted. Cost £ and its likea new gun.top guys at kirklees guns mate glad its sorted for u buddySKoT Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.