pro sport

[fry 209]

im not one for choppin and changin rifles but i had an s400 that i bought back off my son as he never used it! i never used it because i have a 410 ! well today i met a guy at the aust services an swapped it and £30 for a 177 prosport i am well chuffed the only slight problem was the one piece scope mount i bought(up to 45mm ob lense) was a bit snug on my 44mm ob lense scope it really was a gnats whisker i ended up taking the self adhesive protective tape out of the rear mount and sticking it in the front which has made it clear. hope this dont throw the scope out much. any way heres the beauty.

[gurtwurz 793]

now thats a proper airgun and no mistaking frank!!

 

hope you have fun with it mate, you gonna bung a can on the end?

 

cheers, wurz

[fry 209]

now thats a proper airgun and no mistaking frank!!

 

hope you have fun with it mate, you gonna bung a can on the end?

 

cheers, wurz

i want to but would like one threaded on or some thing this recoil lark is a bit strange ha ha

[gurtwurz 793]

youll soon get used to it mate. i've got a silencer made by uk neil that fits the end with a grub screw, but its not a patch on the hw mod. i did try a home made one with a red bull can, some scotchbrite and haircurlers but it was just not quite right lol

 

cheers, wurz

[fry 209]

could you post a pic of the hw mod with the tape off so i could see the way of it mate

[gurtwurz 793]

i cant post up photos on here at the mo mate-hence no hunting posts- but i'll bung some up on your FB page for you laters.

 

cheers, wurz

[Rake aboot 4,936]

Tastey,, always liked them,, some reckon they are the best piston gun out there,, try fitting strips of photographic film under the scope, on top of the bottom half of the mount. both front and back

[*Ross 4]

Lovely looking bit of kit, funnily enough I'm contemplating swapping my S400 for one too! Can't quite make my mind up if I can live with the weird underlever or not

[vizlauk 1,568]

Very nice gun indeed, I have 1 on my wish list ! Top quality bit of kit, I think you may have to change your scope mounts for a higher set, as you may struggle to zero in at distance.

[fry 209]

Very nice gun indeed, I have 1 on my wish list ! Top quality bit of kit, I think you may have to change your scope mounts for a higher set, as you may struggle to zero in at distance.

really i have packed them up even now probably less than 1 mm do you not think that will do

[The Duncan 802]

That will probably do, but suck it and see.

 

Always, always fancied a prosport but never got round to owning one (need a much, much bigger gun safe now lol!).

I am slightly envious as yours looks gorgeous.

Please let us know how you get on with it ]

 

Cheers

 

Duncan.

[fry 209]

ah just put a chrono on it getting an average of 10.25 but erratic down as low as 9.6 up as high as 12.5 (not the 11.2 the fella i got it off said)any ideas folks?? if i have to dismantle it i may as well v-mach it for 74 quid! which leads to does any one here know how to date it? serial 0526399 and does any one know the best place to buy a v-mach kit. cheers.

[davyt63 1,845]

hi Fry

check here buddy

 

http://www.air-rifle-tuning.com/v-mach/Shop.html

 

http://www.air-rifle-tuning.com/v-mach/Products_and_Information.html

 

hope this helps

 

regards

 

Davy

[fry 209]

ta davy

[gurtwurz 793]

Just a thought mate, if a v-mach kits 70ish quid, doesn't tony wall charge about that to fully tune springers?

 

Might be worth looking into? Did you get those pictures on fb ok?

 

Cheers, wurz