Jump to content

is there any one who has a sterling hr 81 need help ? :)


Recommended Posts


I dont think the air cylinder is big enough to get more power than 12 ftlbs .A stronger spring will just make the gun recoil .The extra powerfull ox spring will just cause wear and tear on the gun .If the spring gets to strong you will lose power because the piston will bounce back before the pellet has left the gun .If your gun is shooting better with washers it may be shooting at the max power now .The gun was made to be a 12 ftlbs gun . So to get the gun to shoot well at 12ftlbs is the best you can do .To get more power you need a different gun.

Link to post

What's this thing with washers in springers? It's a load of old bollox. You've not changed the amount of power in the spring in any way, all that happens is that the pre-load is increased and that does not affect power at all. What does happen very often however, is that the trigger doesn't engage properly.

 

If it's shooting better it's down to the fact the gun's been stripped, cleaned and re-lubed. mate.

Link to post

Oh dear !!

 

You`ve fell at the first hurdle mate,,

 

Don`t tune a gun above 12 ft lbs without an FAC,, 5 yrs standard sentence,, instant expantion in arsehole circumferance

 

Don`t talk bollocks about washers etc,, it shows you do not really know what yer on aboot !! hahahahaha

  • Like 1
Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...