hullhunter 219 Posted May 20, 2010 Report Share Posted May 20, 2010 hi all is there any way i can fit a silencer to my tx 200 and do you think it would make much differance? if you can and think it would make a differance what would you recomend? thanks chris. Quote Link to post
garfield 23 Posted May 20, 2010 Report Share Posted May 20, 2010 air arms do one for their under lever's it has a male thread on the end of it and screws into your barrel at the end but i wouldnt bother to be honest as the action makes more noise than the muzzle blast Quote Link to post
Phantom 631 Posted May 20, 2010 Report Share Posted May 20, 2010 But on the other hand, its only you that hears the action, bunnies 30 yards down range won't hear the action, well they probably will given the size of their lug's but not much. I have a silencer on my springer and 30 yards down range the noise is very limited Take the silencer off though and boy do you hear a crack You can also take steps to dampen the noise of the action transfering through the wooden stock. I did this to my springer, simply put a little felt or rubber between the action and stock. I was scepticle at first, but it works a treat Phantom Quote Link to post
Marksman 934 Posted October 10, 2010 Report Share Posted October 10, 2010 hi just been reading some old posts and came across this topic. my question is do you lads have any advice on how to make a air arms tx200 hc a bit less noisey would the above work on my gun if so how do i do it, any tips A general service normally does the trick.... Take it apart, degrease, deburr & polish(fine grade of emery cloth) any working parts to make them smoother, new piston seal, LIGHTLY regrease the working parts using the recommended greases WITHOUT getting any in front of the piston seal as this will cause dieselling, and then do what Tony(phantom) said, felt/rubber between the action and the stock to lessen vibration and you should have yourself a quiet smooth working rifle Darryl Quote Link to post
pianoman 3,589 Posted October 12, 2010 Report Share Posted October 12, 2010 I had a Parker Hale silencer fitted to my TX200HC Mklll .177 carbine rifle for a while. It made very little difference to the actual muzzle report and, nowadays, I shoot perfectly fine without it. My TX200 MkIII Standard rifle is .22 and is not threaded to take a silencer nor do I see any need for one as the gun's muzzle report is pretty moderate on firing. As with previous replies, a good strip down service, lube and polish will keep your rifle running sweet and quiet enough. Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.