Jump to content

mickeyfn19

Members
  • Content Count

    286
  • Joined

  • Last visited

Everything posted by mickeyfn19

  1. wanting an ir torch for a reasonable price, £40 max
  2. I use sony nightshot with my NM800 IR, stunning view. cheers for that mate. was wondering which nm i should use as some cameras are more sensitive to different frequencies. and i was thinking about the cree lights but they dont travel very far. i dont really want to spend more than £20 on an illuminator as the camera was only £45 and i could pobably make an ir illuminator for £20.
  3. no worries bud, enjoy your new rifle. cant say i would of acted differently!! lol
  4. i just bought a sony handycam to mount on the back of my scope. im wondering if i can use a night vision monocular as an illuminator?
  5. will they not start to stink when in transit?
  6. me too, i go shooting every now and then, if you want them ill let you know when i get some
  7. right, ill keep that in mind and ditch the idea of camo tape. might just wrap it in standard electrical tape. just so the gun keeps its value!! obviously i would take it off when selling.
  8. ok but its hard to get into all the tight areas. although if the blue is any good it shouldnt rust anyway right?
  9. im going to get my gun re-blued but i wanted to either get it dipped in lacquer so the bluing doesnt rust again or get some gun tape that would make the gun water tight? anyone know of anything like that?
  10. using h+n ftt's, seem to be the best pellet for the gun. im fairly sure the gun isnt leaking but i will check tomorrow!!
  11. cheers mate, yeah its a pcp and i have tried from full pressure down to min pressure but still really low. might try grinding a little off the valve stem so that the hammer can build up some more momentum before it hits the valve? but i dont think it is the hammer spring anymore as i tried sticking some washers behind it to "pack it out" but that didn't make any difference, it actually made the gun group terribly!!
  12. hi all, basically when i bought this gun about three years ago it was shooting at a nice 11.5 fpe. i have just checked it again and it is shooting at a rarther upsetting 8.5fpe. i have checked all of the power adjustment screws and what not but they are all screwed right in so i cant get any more adjustment. what could it be. i have also checked the bolt seal, that is fine. could it be that the hammer spring is getting weaker as time goes on?
  13. of course i would plug any holes lol
  14. hi all, im just wondering if i could anadoze my rifles barrel black instead of getting it blued as a new air tube is £18 so might aswell get one of those instead and then just get the barrel done. how much do you reckon it will cost? will it be cheaper than bluing? will it be more durable and less prone to rusting?
  15. amke me an offer and as for the mk im not sure, what are the differences?
  16. well i managed 90 yard headshots on rabbits. i think an s200 would struggle although ive never tried one so its just a guess from me but most guns cant make those shots.
  17. yeah sure, sorry about that, had to resize them,
  18. hi all, here is my old webley vulcan in .22 flavour. stock is in decent condition but the metal work could do you some tlc. im open to any offers, would prefer cash but would swap or if you haev the right rifle it would part ex!!
  19. but falcon fn19 and aa s200 are basically the same gun. there wouldnt be any difference in performance, if anything i think it would be worst!! just because i seem to have a good one if you know what i mean.
  20. was looking to get a new rifle but just dont have the cash. and after today i cant let my falcon fn19 go. i took a rabbit out at 90 yards!!
  21. well i guess it's my scope as it has had a shotgun dropped on it lol. also, im thinking about buying a webley axsor. are they any good?
×
×
  • Create New...