Jump to content

Lancashire Hunter

Members
 View Profile  See their activity

  • Content Count

    167

  • Joined

  • Last visited

 Content Type 

Everything posted by Lancashire Hunter

  1. Lancashire Hunter
    What about the ct-2 synthetic grease?
  2. Lancashire Hunter
    Arrgghhh right now i get ya. Cheers for that buddy. So are any of the greases i mentioned apart from the moly any good?
  3. Lancashire Hunter
    Hi all. I was just reading through some comments feed back ect regarding tuning. And what is the lock up time? And how is this done? And what is buttoning? And last what greases that are needed for certain areas? I have bisley moly grease and pure silicone grease and ct-2 synthetic grease so what parts do i re lube with what? So say what do i put on the main spring? What do i put on the piston ect? Cheers and thanks.
  4. Lancashire Hunter
    Or swap for either a hw77 hw80 or a cheap pcp like a ultra or similar.
  5. Lancashire Hunter
    Hi all im selling my weihrauch hw90. It was made in may 1991 according to hull cartridges data base. Its the full length barrell which i had threaded and fitted a parker hale silencer. Wood has been re done in walnut brand new seals fitted very very accurate and seriosly quite. Very long barrel. Blueing is wearing a little. This is a really nice gun to shoot with the theoben gas ram system. So there is virtually no recoil. It is shooting pellet on pellet out to around 40 yards. Shooting at 11.56 ftlb with bisley long range gold .22 pellets. It is a reluctant sale but one i must make. So
  6. Lancashire Hunter
    Well i polished the piston up to mirror finish and polished the chamber up and regreased it properly as it had a stupid amount of grease and the recoil has disappeared near enough it is now shooting at 11.81ftlb with air arms diablo fields and at 40 yards im getting 2p size groups with 10 shots but im going to also try some daystate rangemaster li as the air arms most were badly damaged and causing some flyers. But i also have a welsh willy kit coming so it should be one amazing rifle for a cheap chinky one lol. And replaced the horrid centre point scope with a nice big 3-9×56 scope which ha
  7. Lancashire Hunter
    Cheers mate i will give that a try.
  8. Lancashire Hunter
    Hey all i have had my crossman tr77 tuned by welsh will and it shoot amazingly. But what i would like to know is how would i go about adding extra weight to the front end of the rifle? The reason i ask this is there is a bit of muzzle flip and i can only put it down to the rifles extremly light weight. When i take the rifle out of the stock there are cut outs and groves which i did think of pakcing them up but what can i fill these cut outs with? Or am i best trying to add a barrel weight?
  9. Lancashire Hunter
    Hey all finished my bsa project sold it on and was in my local gunshop by some cartridges. And saw a crosman tr77 in 177 cal. And must admit for a cheap chinese gun it is really nice to shoot. With air arms field diablos its chronoed at 11.75ftlb as a average a high of 11.83ftlb and a low of 11.34ftlb. And at 33 yards im getting 2p coin groups havent tryed it at further distance yet but as first thoughts go really impressed. Down side the trigger is crap. And when i took it out the stock its as some no nothing has got a tub of moly grease and spooned it in so in the process of stripping it cle
  10. Lancashire Hunter
    Gun now sold thanks for intrest
  11. Lancashire Hunter
    I totally agree pal it is the most useless design they could have come up with. But on the up side when the piston came out and i polished it with wet and dry 400grit paper for the best part of 2-3 hours and a bloody good clean and polish of the cylinder and spring ect christ it was a huge transformation it was so smooth. Re greased with ptfe teflon grease and WOW. Smooth cocking very effortless a very slight nudge. And was doing 11.7ftlb with bisley long range gold. Started the second one cocks lovely buy got to wait for a new safety circlip sear spring and trigger strut. O and now a new st
  12. Lancashire Hunter
    Hi guys i have available some pigeon shooting coming up on some spring drillings. Hopefully next week and im looking for a buddy to join me and help keep the pigeons down. But before i take anyone on the drillings i would like to have a meet up and shoot on a diffrent perm i have on a stubble field as a get to know each other. This is not me giving someone permission to shoot and turn up when they want but to help out. Thanks chris
  13. Lancashire Hunter
    The scope rail is actually easy to remove. I stood the cylinder up on the rear end and with a block of wood and hammer i knocked it down and it comes off. Figured out how to put trigger together the first lightning sorted it and polished everything up put back together fired about 10 or pellets and wow i cant believe how nice and smooth it is to shoot started on the second one took piston out rang my gunsmith as i noticed that in the first lightning only had 1 piston weight and the second had four and wanderd why and turns out it more then likely was a 177 and some one put a 22 barrel so put
  14. Lancashire Hunter
    For sale is my 12 gauge laurona side by side 3inch magnum chamber 1/4 & 1/2 choke 14inch pull to the front trigger 28 inch barrel it is a non ejector. The wood is really nice bores are mint. The blueing is not that good though. But once reblued it will look really pretty. I have tryed uploading pictures but it want let me. If you would like to see any photos send me your number via pm and i will text some pics of it. Im looking for 120 ono. Will rfd for extra
  15. Lancashire Hunter
    As above you can buy a semi decent bsa webley or even a brand new stoeger for 160-180. The stoeger is a full powerd budget gun and you get rifle and scope for around 160ish not the best but far better then smk crap. Yes you can tune ect a b2 but it wouldnt be worth it. They are really only good for kids shooting at barn doors or clubbing rabbits to death lol.
  16. Lancashire Hunter
    Hi all im getting a bsa lightning as a project paying 40 for the rifle needs a new trigger spring which was in my previos post regarding how to fit it im now sorted on it. What i did want to do was convert it to a .177 Someone said to me wouldnt bother as they shoot crap in .177 But is that true? I will be litterly gutting the whole rifle with all new seals polishing every internal part plus the trigger components will also get polished up. What are your views on converting it to a .177 is it worth it? Thanks in advance
  17. Lancashire Hunter
    Cheers mate will have a look.
  18. Lancashire Hunter
    Hi guys. I have been offerd a bsa lightning but all it needs is some new seals and a trigger spring. I have orderd all these. Im fine putting the seals on but its the trigger spring im struggling to find any info on how to replace from what the bloke has told me it has been taken out. And for a bsa for 40 quid i cant pass up the oppertunity. Any help guys will be very gratefull thanks.
  19. Lancashire Hunter
    Hi guys not sure if this comes under a wanted or swap ad but im looking for a .177 spring air rifle either bsa lightning or equivalent as ideally a project but i have a weihrauck hw90 .22 origanlly made in march 1990 according to what hull cartridge have told me. I have restored this rifle myself it has the standard 90 barrel at full length which i had threaded i reblued the whole rifle replaced all the seals re lubed and re assembled wood is walnut shoots really nice and smooth and with the parker hale silencer is deadly quite. And would possably be happy to do a straight swap for the right
  20. Lancashire Hunter
    Did you grease up the spring, piston, spring guide, top hat and piston chamber? Im no expert but im positive it certainly shouldnt be twangy especialy after a vmack put in.
  21. Lancashire Hunter
    Thanks guys i guess those pigeons crows rabbits and foxes better watch out as big daddy is gunna be about hahahaha.
  22. Lancashire Hunter
    Hey all well the day came. And result is i get my licence back. And it should be in the post and on its way by next week to say am happy is a understatment. Thanks all for your advice and help and supportive words im very grateful.
  23. Lancashire Hunter
  24. Lancashire Hunter
    Hi guys im just wandering how you guys ferret around bramble bushes? I have a perm that has some very large warrens with alot of bunnies in but it is severly over grown with brambles the perm is on a stables so i do need to make a big hit on there population. Cheers in advance
  25. Lancashire Hunter
    It will be but waited this long so a bit longer want harm me. Will be after the shoot season finished but as soon as i get it if i do that is i have a gun lined up and will be straight out if i do. Bring on the next shoot season though. And have got full access on a perm of about 100 acres to shoot any game wildfowl and vermin so i have been busy working on there tidying up cover opening up the flight ponds and building feeders plenty showing there already so cant wait for this october.
×
×
  • Create New...