leeroy
-
Content Count
256 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Articles
Gun Dealer's and Fieldsports Shop's
Reloading Room
Blogs
Calendar
Store
Classifieds
Posts posted by leeroy
-
-
Show us some picks then sounds like it will be a looker.
-
Cheers for that I will try and pick one up first of the e bay it any one hears of one please let me know cheers again all.
-
Idleback chair, has any one got one and are they any good ?. I am going to build a benchrest shooting table and will need a stool along the lines of this one that can be adjusted for hight . Is there anything as good as this that would do the job and is a bit cheaper .
-
I got some Lupa 223 once fired if you are intrested PM me
-
I made it up there on monday , I must say they do a good job they will make you anything at all stock wise . In the end I have ordered a A5 style stock in fibreglass With a marble finish colour of my choice adjustable cheek and a recoil pad off my choice ,slightly shorter length as I use a wild cat mod so this will be a custom build made as I want it to fit me . Basic price is 250 and then you can change and build it as you want it , they also will make a carbon fibre one off if thats what you desire.
But from what I have seen they do look well made .
-
As long as its up to the job ie most are tested and will say on them what they will fit . Your avarage air rifle mod will stand up to very light pressure that a rim fire will put out just make sure you have it on your ticket.
-
Relax just try and be normal thats all they are looking for . As long as you have the reason to have and a place to use and your of this planet you will be fine keep cool good luck.
-
If you clean it that often you will more than likley do more damage to the bore than any thing, I would give it a clean and shoot it . If you are going to a range and plan on zaping off loads I would clean 20 then say 50 and just now and then. Enjoy your new gun .
-
Hes shot him self in the foot no pun intended , if he had told them if ,he was lucky might have got it . I think he has shown the police he can not be trusted , I would just forget the tenner .
-
They are a good rifle , I have had one, the trigger can be heavy but with a bit of work I got mine to be much lighter and crisp and shoot better, but there are no adjustments on this trigger . My Cz was every bit a shooter as the Sako Finfire that I have now . They are a simple rifle with not a lot to go wrong that shoot well and are fairly cheap I would have another if I needed one. My rifle had also been cut down and still shot well.
- 1
-
Yes will do , they will inlet any of there stocks for an 85 so should be a bit of choice . I have told him I want to handle a few and he said no probs so will let you know what I think on monday fingers crossed as not a lot of choice out there for my rifle.
-
Inletting plus bed for a A5 style in fiber glass I think he said was about 500 all done ready to go.
-
I am thinking off going for a look has any one got one off there stocks ? and what do you know about them are they any good . I have been looking around and there is not a lot of choice for a Sako 85 in 22-250 , but they will inlet any of there stocks composit or fiberglass. I must say they dont look bad at all. What do you think!.
-
I am glad you think the same as I do its a real good bit of kit , have fun with it happy shooting
-
A farmer told me its a mite that causes this he also said best way to get rid of it is blast water in there as this kills them off , worth a go I would give them all a good wetting nothing to lose.
-
I am looking for a Mcmillan stock to fit a Sako 85 in 22-250, if there is any about for sale I would like to see some picks if poss please. Sorry about title computer mucking about and I cant edit it.
-
What do you want to use it for dog/rifle etc
-
Thats a good idea I will keep an eye out and put an advert on a few places see if theres any thing out there thanks for the thought.
-
Very nice, I dont supose yours is the one with the sliding block in the front end that works as a barral tuner . Also where did you buy it from if you dont mind me asking . Also post above 3/4" at 100 yds is a lot bigger at 300 plus so the better I can get it even a small amount within reason is good thing . I know its not going to be a bench rest rifle but every bit helps.
-
Is there any body there !!!!!!
-
I am thinking of changeing the nasty plastic feel stock that Sako fit to some of there 85 rifles. If you hold the butt firm ish it creaks like an old door.
The gun shoots ok just feels a bit nasty . I have only just started to look around so early days yet, I have just been on the Bell and Carlson site and they have a intresting one on there with a adjustable block that they say tunes the point of contact between the stock and the barral.
There is a clip on u tube showing it being tuned it looks good what do you think?. How many different companys do good aftermarket stocks to fit the 85 ?. The rifle is used for hunting fox mostly I hand load and want the best I can get out of my rifle. Any help or if you have a stock what do you think of it ?. Cheers
-
Well done you its a bute I have the same in 22 and love it , it will put shot on shot if you do your bit . I did have a little trouble with mine to start off with but daystate soon had it sorted , best wood I have seen on one enjoy your new rifle .
-
Have you got any more details about it age price etc cheers
-
Try UK Custom shop they have a good selection and they have a sale on at the mo . I have had a fair few things from there over the years and they are ok give them a call 01905 797060. They do Howa ect and can get most makes might save you some wonga . Good luck with your choice 22-250 is a great round I have a sako 85 . You could always buy a used gun and think about a custom new tube later ?.
Sticking Chamber
in Rimfire, Centrefire & Shotguns
Posted
I would send it back to where you had it from there should be some cover left on it if you had it from new, most guns come with at least 12 months I would have thought. By saying take some sand paper to the chamber is prob not a good idea, good luck .