Jump to content
Outback 1

Check these bad boys out .

Recommended Posts


watched it this aft... defiantly worth a go if you've got fac air:thumbs:

ive been on about drilling out jsb heavy's to jimmy, not quite the same league as matt's but them heavy's just go straight through rabbits!

atb si 

Share this post


Link to post

I have emailed the guy to se if we could get some over here , I recon if we could get enough interest on here and do a group buy .

ATB 

Share this post


Link to post
On 30/11/2017 at 19:02, Outback 1 said:

I have emailed the guy to se if we could get some over here , I recon if we could get enough interest on here and do a group buy .

ATB 

And any reply to that ?

its an interesting idea, one I had toyed with before, but after reading the comments posted, it seems they are too hit and miss size wise, which would make sense and correlate with my findings of differing head sizes suiting different barrels, that problem would be multiplied by using a solid slug.

I would still be interested in trying a batch in a few of our rifles, who knows, may even find one that suits.

Share this post


Link to post

I have past this link on to a guy that is set up for importing and could set this up , and waiting for his comments . I need a 5.52 head size so if the imperial sizing would allow this also may be his lead type and tolerances would make it a runner .

His comments are he has tried these through a list of rifles . 

Share this post


Link to post

Well, these are quite close and available here, what is more, I have a tin in .25 which I tested through my Impact at 47fpe........................................fcuking shocking groups, by far the worst on test by a country mile. I was lucky if I emptied the mag at 25mt and kept most of them on a postcard size.

 http://voymir.com/hn-25/370-hn-grizzly-airgun-pellets-cal-25-635mm-150pcs-4047058018461.html

 

Perhaps the ones on test with Matt far much much better than the crap I have.

 

Phil

Share this post


Link to post
22 minutes ago, philpot said:

Well, these are quite close and available here, what is more, I have a tin in .25 which I tested through my Impact at 47fpe........................................fcuking shocking groups, by far the worst on test by a country mile. I was lucky if I emptied the mag at 25mt and kept most of them on a postcard size.

 http://voymir.com/hn-25/370-hn-grizzly-airgun-pellets-cal-25-635mm-150pcs-4047058018461.html

 

Perhaps the ones on test with Matt far much much better than the crap I have.

 

Phil

You've just reminded me I think I have a tin of those lodged in some back corner of a drawer, couldn't have been much good for me or they would be getting used.

 

My main concern is a solid slug down a choked barrel, skirts have some give, solid slugs won't.

Share this post


Link to post

Given some time I'm sure they will get it all worked out ,we live in a ever changing world ,one full of daily developments ,all it takes is a fresh idea .

  • Like 1

Share this post


Link to post

What this guy is doing is hand making this and he is saying he is using a certain type of lead ( its all explained in his text) which can form to the rifling contour and give a bearing surface like a bullet .

I hope my guy gets his act together and goes for it , or I will buy a pack for my self and give them a run .

toolebox / do read any Nathan Foster articles ...

ATB

 

 

 

Share this post


Link to post

Up dating this , my guy has talks regarding getting samples over from the states , there will be two lots of .22 and three lots of .25 and one in .30 .

Will update as I know more .

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

×