PEGS FOR SNARES

[Chainman 8]

HOW BIG SHOULD THE PEGS BE FOR RABBIT SNARES AND WHATS THE BEST WAY TO ATTACH THEM TO THE PEG THEY ARE THE EVERYDAY SNARE WITH WOOLEN CORD YOU CAN BUY FROM EVERYWHERE ANY HELP WOULD BE GREAT PEOPLE THANKS :ph34r:

[woodga 170]

HOW BIG SHOULD THE PEGS BE FOR RABBIT SNARES AND WHATS THE BEST WAY TO ATTACH THEM TO THE PEG THEY ARE THE EVERYDAY SNARE WITH WOOLEN CORD YOU CAN BUY FROM EVERYWHERE ANY HELP WOULD BE GREAT PEOPLE THANKS :ph34r:

 

those snare are to be blunt shite , but since you have them and you want to use them as peg wires you can add a peg made of hard wood 6 or 7 inches long your choice depending on the ground you want to snare drill a hole 1 inch from the top of the peg put the twine through this hole tie a double knot that wont slip back through the hole when pulled,then cut a few hazel tealers about as thick as a pencil around 7 inces long make a slit in the top of this wand to hold your snare wire over the run when you have knocked the peg in along the line of travel , this is old style snaring you would be better off taking the string off useing the wires as fence snares and getting custom made peg wires for the job like these

GOOD HUNTING ALL WOODGA :ph34r:

[Chainman 8]

THANKS FOR THE ADVICE IM JUST WAITIN TO GET PAID THEN WILL BE ORDERIN SOME OF THEM OFF YOU MATE NICE ONE

[MR TEA POT 1,287]

THANKS FOR THE ADVICE IM JUST WAITIN TO GET PAID THEN WILL BE ORDERIN SOME OF THEM OFF YOU MATE NICE ONE

hi [bANNED TEXT] they are very good snares off woodga,he will even give you advice on how to set them

[robsharpe 1]

chainman there is a lot of work goes in to them see PEG MAKING AND GOOD THEY ARE TOO

[Guest Trapper5589]

HOW BIG SHOULD THE PEGS BE FOR RABBIT SNARES AND WHATS THE BEST WAY TO ATTACH THEM TO THE PEG THEY ARE THE EVERYDAY SNARE WITH WOOLEN CORD YOU CAN BUY FROM EVERYWHERE ANY HELP WOULD BE GREAT PEOPLE THANKS :ph34r:

 

 

Contact Pegand gun OR woodga.

They'll show you proper snares. and how to set them properly.

 

The Snareman Scotland