Longnet top line

[Guest Magwitch]

My long net top line is in need of repair, its nearly fraid right through any ideals how to rejoin it.

[MEG 52]

My long net top line is in need of repair, its nearly fraid right through any ideals how to rejoin it.

i have seen one that has been stitched together

[Malt 379]

What's it made of Mag? Could you splice it together?

[para1 11]

My long net top line is in need of repair, its nearly fraid right through any ideals how to rejoin it.

 

Don't be a tight ass, do the job right an get a new line

[Guest Magwitch]

its a quickset so its not that easy

[Coatesy900 0]

parcel tape?

[para1 11]

its a quickset so its not that easy

 

With you mate one post joint to next post

[gilly-93 31]

Melt them together

[gollum 1]

My long net top line is in need of repair, its nearly fraid right through any ideals how to rejoin it.

 

If its braided nylon, try threading one end inside the other, then stitch to hold in place. Works great and the outer sleeving braid pulls tight on the inner bit when tension applied.

 

Hope that helps.

 

HH.

 

G.

[TOMO 29,202]

mag, even though its a quikset , you can still splice them together

 

give me a ring mate, its time you came up for that day out

[Murph 30]

I'd just whip over the top of it, if it was snapped i'd stitch it back then whip over it to protect it.

[ianrob 2]

I'm assuming this is braid. Ok cut out the frayed piece. Get a needle with a large eye, and lay the two ends so they overlap by about 6" or 15cm to the younger generation. Thread 2" or so of one end into the other braid and do the same with the other end. It doesn't really matter how much braid you pull into the other piece as it's just so it won't catch on the net. Once you have both ends buried, then sew the two lines together using fine nylon string or carpet thread and you should have a repair that is strong and that runs through your net. "Tip" if you haven't got a suitable needle a loop of brass snare wire does. :thumbs-up: