BULL 100 Posted April 21 Report Share Posted April 21 Hi all New vision I bought the hik allex 4k lrf i’m having trouble using/setting up the ballistic calculator. I’ve input the data zeroed in at 30 yard on a 22LR hitting a target bull’s-eye area within the size of a £.50 piece I can do the same at 40 yards when I go to 80 to 100 yards to check the LRF. It keeps showing the second crosshair higher than the original crosshair and when I shoot at the target it is a foot below consistently so I allowed about a foot above and hit the target. I’m not sure what I’ve set up wrong I remove the site tried it on the HMR exactly the same I’m sure I’ve done everything on the guide but the only bit I don’t understand and I can’t find any information on is the numbering when programming the ballistics so you get ABC I choose A for 22 and then there’s a number 123 that I your asked to put in after that on the ballistic calculator no clue what is the correct number? I can’t find any info on it is that causing the ballistic calculation to be a foot low or is there something else I’m doing completely wrong any ideas or any info would be appreciated cheers Quote Link to post Share on other sites
Kalibrgun 1,202 Posted June 16 Report Share Posted June 16 Have you out the ballistic coefficient of the bullet in ? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.