Logan s16 strip down guide

[AndyD89 253]

Can anybody recommend a good strip down guide for a Logan s16??  Got the rifle out after a few year of not being used much, and it now has a air leak. As soon u put the bottle on there is air hissing from the action. Just assuming it’s a o ring that needs replacing somewhere. So with all the gun shops / gunsmiths closed   thought I’d attempt it myself , I’m pretty handy so think il be alright with it. But a good guide would be handy, could anybody recommend a good one?? 

 

Any advice much appreciated  

[barrywhite 282]

Home « LOGUN S-16

WWW.LOGUNS16.CO.UK

---

Helping owners maintain, service, disassemble and modify their Logun S-16 compressed air rifle – S-16s, S-16Evo and S-16Xs. Tips, forum, guides, O ring...

   don,t know if it's good or not but all information has to help .

[xraiderx 95]

I thought they fell apart themselves 

[Dan-no 0]

These were notes to self tearing down the gun years ago.  I hope this helps. 

 

Logun S16 tear-down procedures

 

Leave on the grips

 

Two screws on the scope mount on top

 

Look down inside near the back of the slot is a spring; underneath is the allenhead screw that has to come out; one in front of it that comes out too.

 

 

Take the 2 front screws out to slide the barrel out with stuff attached, cylinder with an o-ring, then beyond that are the parts that turn the magazine.

 

There is a small connector ((piece of wire) that I will see when I take the carrying handle off. It connects the barrel to the cocking handle; coat hanger with an L bend; just lift it out. Short bend to the front oft the gun.

 

[ChrisBaker 4]

On 29/03/2021 at 20:46, AndyD89 said:

Can anybody recommend a good strip down guide for a Logan s16??  Got the rifle out after a few year of not being used much, and it now has a air leak. As soon u put the bottle on there is air hissing from the action. Just assuming it’s a o ring that needs replacing somewhere. So with all the gun shops / gunsmiths closed   thought I’d attempt it myself , I’m pretty handy so think il be alright with it. But a good guide would be handy, could anybody recommend a good one?? 

 

Any advice much appreciated  

Check the Airguns Forum or Gateway to Airguns (GTA) for Logan S16 strip-down guides. YouTube also has helpful video tutorials. The leak is likely a simple O-ring replacement. Just be sure to degas the rifle fully before starting.

[philpot 5,124]

On 16/09/2025 at 15:33, ChrisBaker said:

Check the Airguns Forum or Gateway to Airguns (GTA) for Logan S16 strip-down guides. YouTube also has helpful video tutorials. The leak is likely a simple O-ring replacement. Just be sure to degas the rifle fully before starting.

The post is 4 and a half years ago so I think he may have sorted it by now......................................

Phil